Re: Moose Z1100 Problems

["Mark Leuck" <m..leuck@xxxxxxxxx>]

"alarman" <alarman2000@xxxxxxxxx> wrote in message
news:8OxRh.153986$p17.99701@xxxxxxxxxxxxxxx
> Doug wrote:
> > There may be nothing wrong with the system, its possible your phones
> > go dead because the alarm panel is trying to communicate with a
> > central station, its normal for the panel to seize the phone lines
> > when communicating (or attempting to communicate) with a central
> > station. If your alarm company went tits up then their central
> > station receiver line may have been disconnected. Your alarm will
> > normally attempt to communicate about 8 times before giving up and
> > reconnecting your phone line. If you leave the system plugged in for
> > 15 minutes or so, then the phones may start working again.
> > Doug
>
> If that is the case, you can try turning off the main power switch at the
> bottom of the left hand terminal/mounting strip. Once that is off, the
panel
> can not seize the line, but your phones will still work.
> js

Yes switching off the main power switch is the best solution for that panel


:)