[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: contact window

Subject: Re: contact window
From: "Don" <don@xxxxxx>
Date: Wed, 25 Oct 2006 10:01:03 -0400
Newsgroups: alt.security.alarms
References: <6V5%g.1836$N4.1279@xxxxxxxxxxxxxxxxxxxxxx> <1161744792.199919.61540@xxxxxxxxxxxxxxxxxxxxxxxxxxxx> <453ed3f6$0$3568$815e3792@xxxxxxxxxxxxxx> <1161748118.975869.264260@xxxxxxxxxxxxxxxxxxxxxxxxxxxx> <Gaudnbs4jemenqLYnZ2dnUVZ_sydnZ2d@xxxxxxxxxxx>

"Robert L Bass" <robertbass1@xxxxxxxxxxx> wrote in message
news:Gaudnbs4jemenqLYnZ2dnUVZ_sydnZ2d@xxxxxxxxxxxxxx
>> Didn't see any dimensions. There's got to be at least a 1/4 inch
>> between the weatherstrip and the inside of the sash ...... No?
>
> The dimension there is 5/16".  Subtract 1/4" for your magnet anf that
> leaves 1/32" on either side of the hole.  Without a jig he's very likely
> to destroy the window.  Not only that, the manufacturer may decide that
> his hole violates the warranty.

where'd you find that dimension.  I couldn't find it.

Follow-Ups:
- Re: contact window
  - From: Robert L Bass

References:
- contact window
  - From: Don
- Re: contact window
  - From: Jim
- Re: contact window
  - From: Crash Gordon
- Re: contact window
  - From: Jim
- Re: contact window
  - From: Robert L Bass

Prev by Message: Re: laptop serial port
Next by Message: Re: contact window
Previous by thread: Re: contact window
Next by thread: Re: contact window
Index(es):
- Message
- Thread

alt.security.alarms Main Index | alt.security.alarms Thread Index | alt.security.alarms Home | Archives Home