Re: DSC PC1555MX

["Roland Moore" <roland@xxxxxxxxxxxx>]

The 17 doesn't exactly mean zone 17. I sent you the keypad installation
manual.
"Ron" <rvdoyle@xxxxxxxxxxx> wrote in message
news:v8udnaCouYZ5GdDYnZ2dnUVZ_sCdnZ2d@xxxxxxxxxxxxxx
> cool..ran a 903 got a 1 than 17....so I guess we have a zone 17 for the
> window...neat stuff...thanks again!!!
>
> Roland Moore wrote:
>> There are extra zones available off of keypads, and wireless receivers
>> and zone expanders. It just depends on what you have. You may have to do
>> a 902-903 to find what's there if you're not sure.
>> "Ron" <rvdoyle@xxxxxxxxxxx> wrote in message
>> news:QpCdnSXYE_RW6NDYnZ2dnUVZ_q2dnZ2d@xxxxxxxxxxxxxx
>>> thanks for that...got it....says only get 6 zones but on the panel the
>>> original installer has zone 7 as the upstairs window....the keypad is a
>>> LCD5501Z and talks of a Z zone...I will read through it...thanks again!!
>>>
>>> Roland Moore wrote:
>>>> I sent you (email) the manual in case you didn't have it. It explains
>>>> how to sent up a zone. If you have specific questions you can post
>>>> more.
>>>>
>>>> "Ron" <rvdoyle@xxxxxxxxxxx> wrote in message
>>>> news:IsydnfTwuu3M89DYnZ2dnUVZ_qOdnZ2d@xxxxxxxxxxxxxx
>>>>> got key pad working but my zone 5 which is motion sensor and zone 7
>>>>> upstairs window are not programmed I guess..can anyone help!!! thanks
>>>>>
>>>>> Ron wrote:
>>>>>> no..only thing I can get from the keypad is the away button...
>>>>>> Roland Moore wrote:
>>>>>>> It won't show what trouble when you hit *2?
>>>>>>>
>>>>>>> "Frank Olson" <Use_the_email_links@xxxxxxxxxxxxxxxxxxxxxx> wrote in
>>>>>>> message news:rA93h.261820$R63.210861@xxxxxxxxxxxx
>>>>>>>> Ron wrote:
>>>>>>>>> was messing with this alarm and now all I get is constant trouble
>>>>>>>>> light on and only response from keypad is when I hit the away
>>>>>>>>> button the program will flash on the LCD...I have tried to reset
>>>>>>>>> to default but still acts the same....any suggestions or did I
>>>>>>>>> ruin it....keypad is a LCD 5501Z fixed...thanks for any
>>>>>>>>> suggestions!!!
>>>>>>>> Check the connections between the control and the keypad.
>>