Re: DSC PC1555MX

[Ron <rvdoyle@xxxxxxxxxxx>]

cool..ran a 903 got a 1 than 17....so I guess we have a zone 17 for the
window...neat stuff...thanks again!!!

Roland Moore wrote:
> There are extra zones available off of keypads, and wireless receivers and
> zone expanders. It just depends on what you have. You may have to do a
> 902-903 to find what's there if you're not sure.
> "Ron" <rvdoyle@xxxxxxxxxxx> wrote in message
> news:QpCdnSXYE_RW6NDYnZ2dnUVZ_q2dnZ2d@xxxxxxxxxxxxxx
>> thanks for that...got it....says only get 6 zones but on the panel the
>> original installer has zone 7 as the upstairs window....the keypad is a
>> LCD5501Z and talks of a Z zone...I will read through it...thanks again!!
>>
>> Roland Moore wrote:
>>> I sent you (email) the manual in case you didn't have it. It explains how
>>> to sent up a zone. If you have specific questions you can post more.
>>>
>>> "Ron" <rvdoyle@xxxxxxxxxxx> wrote in message
>>> news:IsydnfTwuu3M89DYnZ2dnUVZ_qOdnZ2d@xxxxxxxxxxxxxx
>>>> got key pad working but my zone 5 which is motion sensor and zone 7
>>>> upstairs window are not programmed I guess..can anyone help!!! thanks
>>>>
>>>> Ron wrote:
>>>>> no..only thing I can get from the keypad is the away button...
>>>>> Roland Moore wrote:
>>>>>> It won't show what trouble when you hit *2?
>>>>>>
>>>>>> "Frank Olson" <Use_the_email_links@xxxxxxxxxxxxxxxxxxxxxx> wrote in
>>>>>> message news:rA93h.261820$R63.210861@xxxxxxxxxxxx
>>>>>>> Ron wrote:
>>>>>>>> was messing with this alarm and now all I get is constant trouble
>>>>>>>> light on and only response from keypad is when I hit the away button
>>>>>>>> the program will flash on the LCD...I have tried to reset to default
>>>>>>>> but still acts the same....any suggestions or did I ruin
>>>>>>>> it....keypad is a LCD 5501Z fixed...thanks for any suggestions!!!
>>>>>>> Check the connections between the control and the keypad.
>