Re: DSC PC1555MX

["Roland Moore" <roland@xxxxxxxxxxxx>]

There are extra zones available off of keypads, and wireless receivers and
zone expanders. It just depends on what you have. You may have to do a
902-903 to find what's there if you're not sure.
"Ron" <rvdoyle@xxxxxxxxxxx> wrote in message
news:QpCdnSXYE_RW6NDYnZ2dnUVZ_q2dnZ2d@xxxxxxxxxxxxxx
> thanks for that...got it....says only get 6 zones but on the panel the
> original installer has zone 7 as the upstairs window....the keypad is a
> LCD5501Z and talks of a Z zone...I will read through it...thanks again!!
>
> Roland Moore wrote:
>> I sent you (email) the manual in case you didn't have it. It explains how
>> to sent up a zone. If you have specific questions you can post more.
>>
>> "Ron" <rvdoyle@xxxxxxxxxxx> wrote in message
>> news:IsydnfTwuu3M89DYnZ2dnUVZ_qOdnZ2d@xxxxxxxxxxxxxx
>>> got key pad working but my zone 5 which is motion sensor and zone 7
>>> upstairs window are not programmed I guess..can anyone help!!! thanks
>>>
>>> Ron wrote:
>>>> no..only thing I can get from the keypad is the away button...
>>>> Roland Moore wrote:
>>>>> It won't show what trouble when you hit *2?
>>>>>
>>>>> "Frank Olson" <Use_the_email_links@xxxxxxxxxxxxxxxxxxxxxx> wrote in
>>>>> message news:rA93h.261820$R63.210861@xxxxxxxxxxxx
>>>>>> Ron wrote:
>>>>>>> was messing with this alarm and now all I get is constant trouble
>>>>>>> light on and only response from keypad is when I hit the away button
>>>>>>> the program will flash on the LCD...I have tried to reset to default
>>>>>>> but still acts the same....any suggestions or did I ruin
>>>>>>> it....keypad is a LCD 5501Z fixed...thanks for any suggestions!!!
>>>>>> Check the connections between the control and the keypad.
>>>>>
>>