Re: ADT Focus 32

["Jim Rojas" <jrojas@xxxxxxxxxxxx>]

If the small white label beneath the firmware chip states PC5010ADT...you
won't be able to use the DLS2002, unless you have the patch installed.
Sometimes ADT or their authorized dealers use off the shelf boards on
service calls, or if the run out of stock. This is why you were probably
able to get into some in the past.

Jim Rojas


"R.H.Campbell" <rh.campbell@xxxxxxxxxxxxx> wrote in message
news:kvq8g.4843$aq5.217630@xxxxxxxxxxxxxxxxxxxxxxxx
> After taking over a Power 832 from ADT the other night, as per usual, the
> next day I tried to dial in to check my settings. No matter how many times
> I connect (using auto detect or otherwise), the software tells me it
> cannot identify the panel.
>
> I seem to remember dialing in to Focus 82 private labelled panels before
> with no trouble, but this one can't be recognized by the software (latest
> version with all drivers). The client is way out in the country and has a
> very noisy telephone line, so might that be the reason why ?
>
> Anyone had this experience before ?
>
> RHC
>