Re: DVR internet ready

["FIRETEK" <firetech(change-the-ch-to-k)@telus.net>]

Got a link to the manual/information??

Regards,

Frank

"Rocky T Squirrel" <gafa_usa@(nospam)hotmail.com> wrote in message
news:bqednWDpOr5j1YLZnZ2dneKdnZydnZ2d@xxxxxxxxxx
> one of the first things we did, (the direct connection)
> did nothing..  even the factory  couldn't get into it...
>
>
>
> "FIRETEK" <firetech(change-the-ch-to-k)@telus.net> wrote in message
> news:O3BTf.3950$J43.1803@xxxxxxxxxxx
> > Sounds to me like it's a router problem.  Have you tried hooking the DVR
> > directly to the DSL modem?  If this works, you may have to assign an
> > individual IP to each computer in the network, then designate the DVR as
> an
> > open IP.
> >
> > Regards,
> >
> > Frank
> >
> > "Rocky T Squirrel" <gafa_usa@(nospam)hotmail.com> wrote in message
> > news:4ZOdnTs2TvDoSIPZRVn-uA@xxxxxxxxxx
> > > Tks, Spyros
> > > did that first thing,  however originally  the DSL  ISP  had all
> incoming
> > > requests for data  BLOCKED at their servers..
> > > finally got that opened but unit still wouldn't work..
> > > checked the Berklin router through and through, everything was
> programmed
> > as
> > > should be..
> > > we then found out the DSL Modem  was blocking ports.  had it
> reprogrammed
> > to
> > > allow the DVR ports acccess
> > > unit still doesn't work on the internet side..
> > >
> > > We suspect the DSL modem is the problem  but don't know what to do to
it
> > to
> > > find out..
> > > BellSouth  will not  return any question about it to us...
> > >
> > > RTS
> > >
> > >
> > > "Spyros Kintzonides" <spkintz@xxxxxxxxxxxx> wrote in message
> > > news:1142867761.185369@xxxxxxxxxxx
> > > > All you have to do is to port forward the router to the ip of the
dvr,
> > so
> > > > from the remote area you run the software and try to connect with
the
> > > static
> > > > ip of the site installation. Then the router that was previously
> > > programmed
> > > > for port forward to the ip of dvr, do the rest of the job...
> > > >
> > > > "Rocky T Squirrel" <gafa_usa@(nospam)hotmail.com> wrote in message
> > > > news:yaydnRDqlZ1wiIPZnZ2dneKdnZydnZ2d@xxxxxxxxxx
> > > > >
> > > > > Any one ever been able to get one of these China DVR's to work on
> the
> > > > > internet?
> > > > > We've been 3 months  trying with no results yet,
> > > > > done everything the factory and the ISD provider suggested with no
> > good
> > > > > results.
> > > > > it works "fair" behind the router but can't be accessed from the
> > > internet
> > > > > side of the router..
> > > > >
> > > > > RTS
> > > > >
> > > > >
> > > >
> > > >
> > >
> > >
> >
> >
>
>