Re: DVR internet ready

["FIRETEK" <firetech(change-the-ch-to-k)@telus.net>]

Sounds to me like it's a router problem.  Have you tried hooking the DVR
directly to the DSL modem?  If this works, you may have to assign an
individual IP to each computer in the network, then designate the DVR as an
open IP.

Regards,

Frank

"Rocky T Squirrel" <gafa_usa@(nospam)hotmail.com> wrote in message
news:4ZOdnTs2TvDoSIPZRVn-uA@xxxxxxxxxx
> Tks, Spyros
> did that first thing,  however originally  the DSL  ISP  had all incoming
> requests for data  BLOCKED at their servers..
> finally got that opened but unit still wouldn't work..
> checked the Berklin router through and through, everything was programmed
as
> should be..
> we then found out the DSL Modem  was blocking ports.  had it reprogrammed
to
> allow the DVR ports acccess
> unit still doesn't work on the internet side..
>
> We suspect the DSL modem is the problem  but don't know what to do to it
to
> find out..
> BellSouth  will not  return any question about it to us...
>
> RTS
>
>
> "Spyros Kintzonides" <spkintz@xxxxxxxxxxxx> wrote in message
> news:1142867761.185369@xxxxxxxxxxx
> > All you have to do is to port forward the router to the ip of the dvr,
so
> > from the remote area you run the software and try to connect with the
> static
> > ip of the site installation. Then the router that was previously
> programmed
> > for port forward to the ip of dvr, do the rest of the job...
> >
> > "Rocky T Squirrel" <gafa_usa@(nospam)hotmail.com> wrote in message
> > news:yaydnRDqlZ1wiIPZnZ2dneKdnZydnZ2d@xxxxxxxxxx
> > >
> > > Any one ever been able to get one of these China DVR's to work on the
> > > internet?
> > > We've been 3 months  trying with no results yet,
> > > done everything the factory and the ISD provider suggested with no
good
> > > results.
> > > it works "fair" behind the router but can't be accessed from the
> internet
> > > side of the router..
> > >
> > > RTS
> > >
> > >
> >
> >
>
>