[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: DSC general system tamper code

Subject: Re: DSC general system tamper code
From: Frank Olson <Use_the_email_links@xxxxxxxxxxxxxxxxxxxxxx>
Date: Fri, 17 Mar 2006 04:43:42 GMT
Newsgroups: alt.security.alarms
References: <Z9Cdnfd--YF-tofZRVn-vA@xxxxxxxxxxx> <h5qSf.44143$2O6.996@xxxxxxxxxxxxxxxxxxxxxxxxxx> <1dednXvnFceFqYfZRVn-jw@xxxxxxxxxxx>

cel@xxxxxxxxxx wrote:
> 3 keypads 5500Z and 3 8 zone expansion modules 5108 . I believe the 5108
> modules are set not to report tamper I will have to double check the jumper.

Regardless of what they're set for, place a wire jumper between the
"common" and "tamper" terminals on the 5108's.

Frank Olson
http://www.yoursecuritysource.com

Follow-Ups:
- Re: DSC general system tamper code
  - From: cel

References:
- DSC general system tamper code
  - From: cel
- Re: DSC general system tamper code
  - From: Stanley Barthfarkle
- Re: DSC general system tamper code
  - From: cel

Prev by Message: Car and Deep Cycle Battery FAQ
Next by Message: Re: Security idea
Previous by thread: Re: DSC general system tamper code
Next by thread: Re: DSC general system tamper code
Index(es):
- Message
- Thread

alt.security.alarms Main Index | alt.security.alarms Thread Index | alt.security.alarms Home | Archives Home