[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: Ademco FBII Security Panel Circuit Problem

Subject: Re: Ademco FBII Security Panel Circuit Problem
From: "Nick Markowitz" <nick-markowitz@xxxxxxxxxxx>
Date: Sun, 12 Mar 2006 22:44:53 GMT
Newsgroups: alt.security.alarms
References: <1142083482.000513.170740@xxxxxxxxxxxxxxxxxxxxxxxxxxxx>

Check power supply make sure your not pulling to much thru it or that a
field deice is not malfunctioning and pulling too much. check in comming AC
power check to make sure transformer is not putting too much power in some
areas were i normally put a 16 vac transformer i have to put a 12vac
becuase the power runs higher.

you should not have to be replacing panels

Follow-Ups:
- Re: Ademco FBII Security Panel Circuit Problem
  - From: Rocky T Squirrel

References:
- Ademco FBII Security Panel Circuit Problem
  - From: Terry

Prev by Message: Re: DSC 832 Panel CON1 Jumper Location?
Next by Message: Re: Quick opinion poll regarding Bass' multiple "PR" posts
Previous by thread: Re: Ademco FBII Security Panel Circuit Problem
Next by thread: Re: Ademco FBII Security Panel Circuit Problem
Index(es):
- Message
- Thread

alt.security.alarms Main Index | alt.security.alarms Thread Index | alt.security.alarms Home | Archives Home