[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: DSC 832 Panel CON1 Jumper Location?

Subject: Re: DSC 832 Panel CON1 Jumper Location?
From: Robert L Bass <sales@xxxxxxxxxxxxxxxxxxxxx>
Date: Wed, 08 Mar 2006 11:24:50 -0300
Newsgroups: alt.security.alarms
References: <a0nPf.1133$k75.162@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx> <ifqPf.1317$fL3.752@fed1read01> <i9rPf.8286$S25.1250@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx> <6N-dneYKM8qPzZPZnZ2dnUVZ_sidnZ2d@xxxxxxxxxxx> <K4BPf.1646$sL2.720@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>

> "Mark Leuck" <m.leuck@xxxxxxxxxxx> wrote:
>> There is nothing wrong with the DSC documentation,
>> you have a v1 board and the manual is for a v2 board
>
> The manual and panel came together in a factory sealed DSC box.

There's nothing wrong with that, right?  The above is an example
of DSC's ongoing program of quality control "improvement".  :^)

--

Regards,
Robert L Bass

Bass Burglar Alarms
The Online DIY Store
http://www.BassBurglarAlarms.com

--

Never underestimate the power of very stupid people in large
groups.

References:
- DSC 832 Panel CON1 Jumper Location?
  - From: Mike Schumann
- Re: DSC 832 Panel CON1 Jumper Location?
  - From: alarman
- Re: DSC 832 Panel CON1 Jumper Location?
  - From: Mike Schumann
- Re: DSC 832 Panel CON1 Jumper Location?
  - From: Mark Leuck
- Re: DSC 832 Panel CON1 Jumper Location?
  - From: Mike Schumann

Prev by Message: Re: submit
Next by Message: Re: Ademco FBII Security Panel Circuit Problem
Previous by thread: Re: DSC 832 Panel CON1 Jumper Location?
Next by thread: Re: DSC 832 Panel CON1 Jumper Location?
Index(es):
- Message
- Thread

alt.security.alarms Main Index | alt.security.alarms Thread Index | alt.security.alarms Home | Archives Home