Re: Ademco FBII Security Panel Circuit Problem

["Rocky T Squirrel" <gafa_usa@(nospam)hotmail.com>]

do a current check on the output durring an alarm event..
the 2T  has a rather low output current limit..
RTS



"Nick Markowitz" <nick-markowitz@xxxxxxxxxxx> wrote in message
news:Fv1Rf.313$Wb.268@xxxxxxxxxxx
> Check power supply make sure your not pulling to much thru it or that a
> field deice is not malfunctioning and pulling too much. check in comming
AC
> power check to make sure transformer is not putting too much power in some
> areas were i normally put a 16 vac transformer i have to put a 12vac
> becuase the power runs higher.
>
> you should not have to be replacing panels
>
>