[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

DSC Power 832 - PC5501Z Keypad - Zone 1 Question

Subject: DSC Power 832 - PC5501Z Keypad - Zone 1 Question
From: Surebet <surebet@xxxxxxxxxxx>
Date: Mon, 05 Jun 2006 22:59:00 -0400
Newsgroups: alt.security.alarms

I've read the manual and have a question.  Is the wiring for zone 1
different than the other zones?  All of my other zones work fine
except for zone 1.  I know the contact is good and I have even
replaced it on the panel with a jumper between ZN1 and COM and yet the
system still sees zone 1 as open.  Any suggestions?

-Russ

Follow-Ups:
- Re: DSC Power 832 - PC5501Z Keypad - Zone 1 Question
  - From: Bob La Londe
- Re: DSC Power 832 - PC5501Z Keypad - Zone 1 Question
  - From: Surebet
- Re: DSC Power 832 - PC5501Z Keypad - Zone 1 Question
  - From: Tommy
- Re: DSC Power 832 - PC5501Z Keypad - Zone 1 Question
  - From: J Barnes

Prev by Message: Re: "My alarm is making a noise"
Next by Message: Re: Is swann security good enough
Previous by thread: Re: FA150C/4111XM Installer Manual
Next by thread: Re: DSC Power 832 - PC5501Z Keypad - Zone 1 Question
Index(es):
- Message
- Thread

alt.security.alarms Main Index | alt.security.alarms Thread Index | alt.security.alarms Home | Archives Home