[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: DSC Power 832 - PC5501Z Keypad - Zone 1 Question

Subject: Re: DSC Power 832 - PC5501Z Keypad - Zone 1 Question
From: "Tommy" <tommy at leesecurity dot net>
Date: 06 Jun 2006 02:45:01 GMT
Newsgroups: alt.security.alarms
References: <lor982hmeg7h4tjk2a9pgh2gcd6fkps5ch@xxxxxxx>

Check your programming to see if you have zone one assigned to the
keypad.
--



Surebet wrote:

> I've read the manual and have a question.  Is the wiring for zone 1
> different than the other zones?  All of my other zones work fine
> except for zone 1.  I know the contact is good and I have even
> replaced it on the panel with a jumper between ZN1 and COM and yet the
> system still sees zone 1 as open.  Any suggestions?
>
> -Russ

--
Posted via a free Usenet account from http://www.teranews.com

References:
- DSC Power 832 - PC5501Z Keypad - Zone 1 Question
  - From: Surebet

Prev by Message: Re: How does one find employees, including trainees?
Next by Message: Re: Reflections on good and evil
Previous by thread: DSC Power 832 - PC5501Z Keypad - Zone 1 Question
Next by thread: Re: DSC Power 832 - PC5501Z Keypad - Zone 1 Question
Index(es):
- Message
- Thread

alt.security.alarms Main Index | alt.security.alarms Thread Index | alt.security.alarms Home | Archives Home