Re: Motions and power problems.

[Frank Olson <Use_the_email_links@xxxxxxxxxxxxxxxxxxxxxx>]

G. Morgan wrote:
> What panel are you dealing with?  It seems to me you'll want to
> separate the motions, and the easiest way to replace them with
> addressable units (without re-wiring).


I agree with Graham.  You should change out the units to two wire
addressable devices and double up on the quad to avoid the problem with
the voltage drop.  You can also pull another wire from the existing
control to the last device in the loop to allow the addressable devices
two communication paths.  Paradox has an excellent system.
http://www.paradox.ca