Re: Stand alone camera

["J Barnes" <trishnjames@xxxxxxxxxxx>]

I would need a range of 5 to 20 miles and the feed would need to support
about 10ips.  I understand we are talking about thousands of dollars but I
still need a solution.  I could use 12 volt cameras but I would need either
an onsite DVR or a NVR to feed the video to a remote server.

James


"Rich" <Rich3784@xxxxxxxxx> wrote in message
news:2NudnaoQnpm7SwzZnZ2dnUVZ_tOdnZ2d@xxxxxxxxxxxxxx
> You bring up many questions.  Cameras are simple 12 volt to 110 volts.
> There are self contained network cameras with the range of most pocket.
> Connecting to the network can be a problem.
> 1. Hard wired cat 5, not to mobile.
> 2. Wireless to the network card low cost short distanced 200 Ft
> 3. Wireless to a receiver expensive and more distance 1,000 Ft
> 4. Radio to radio super expensive 2-10  miles.
>
>
>
>
>
>
> "J Barnes" <trishnjames@xxxxxxxxxxx> wrote in message
> news:OeydnRXkot35QA3ZnZ2dnUVZ_radnZ2d@xxxxxxxxxxxxxx
>>I need some ideas for a mobile camera system.  The camera will need to be
>>able to send live feeds back to a network.  The camera will also need to
>>be mobile and self contained.  I seen some systems like this that were
>>mounted to trailers at the ISC show.  I dont remember who made these or if
>>I could get a live network feed from them.  Is anyone here using these
>>types of systems or any other similar to it?
>>
>> James
>>
>
>