Re: HELP WITH DSC 2500 NO SIREN

["Allan Waghalter" <awaghalter@xxxxxxxxxxx>]

Try removing the wires to your siren and connecting them directly across the
battery.  If the siren is good, it will work.  If it clicks, you have a
speaker and not a siren.  To test the alarm for function, put a volt meter
across the terminals where you removed the siren wires and activate the
alarm.  You should get 12 volts or so.  If you have voltage, then the siren
is bad.

Yes, any name brand 4 wire smoke will be fine.

Allan


<Flreggaema@xxxxxxx> wrote in message
news:1137336643.073085.29860@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
> 1.HELLO, CAN SOMEONE TELL ME WHAT MIGHT BE THE PROBLEM, I TESTED MY
> ALARM AND THE SIREN IS NOT SOUNDING. EVERYTHING ELSE WORKS FINE, NO
> ERRORS SHOWN. ITS A WIRED SYSTEM. IS IT EASY TO REPLACE.
> 2. MY ALARM IS FROM 1989, WILL ANY REPLACEMENT 4 WIRE SMOKE DETECTOR
> WORK ON MY SYSTEM, I WANT TO REPLACE MY 2.
> THANKS AGAIN
>


I choose Polesoft Lockspam to fight spam, and you?
http://www.polesoft.com/refer.html