Re: Night Stay Zone List Help (ademco)

[JoeRaisin <joeraisin@xxxxxxxxxxx>]

If you can cause the motion to trip an alarm while armed in 'night' mode
then it is working..

briansgooglegroupemail@xxxxxxxxx wrote:
> JoeRaisin wrote:
>
>>Adding thezone can be trickey and sometimes you may think you have done
>>it when you haven't.
>>
>>Make sure you have the keypad set up to emulate a normal alpha keypad.
>>
>>* 81
>>05 * get's you into zone list 05
>>
>>insert 2 digit zone number then *
>>00 * that tells the system you are done adding zones
>>you dot not want to delete a zone so say no
>>you do not want to delete a zone list so say no
>>* should get you back to the main programming area
>>
>>what used to trip me up was exiting without doing the 00...
>>
>>not exactly sure how to activate night stay with the 6270 but I'm pretty
>>sure you have to do some finagling
>
>
> Well I can see that the zone is added to zone list 5 when I go back
> into *81 after rebooting.  And I assume Night-Stay is working, because
> when I use the "Night" button to set the alarm, the interior-follower
> zone gets disabled and the lock icon indicating the system is armed
> appears next to the "Night" button on the keypad....  During away
> arming it appears next to the "Away" button, etc.
>
> But no dice.
>