Re: Strange

["Petem" <petem001@xxxxxxxxx>]

I you press the * and # while powering have someone at the keypad folding
the key pressed when you put power to it) and you will go in programming
mode,been there and its a damn pain....


"Matthew Stanley" <armorsecsys@xxxxxxxxxxx> a écrit dans le message de news:
lo1ih.1017$vp5.739@xxxxxxxxxxxxxxx
> Ok...well, I might have messed it up anyways....Im moving into a house I
> bought and I had some Ademco wireless devices here in the house installed
> with a Vista 50P. I took the system out an installed a hardwired system..
> I had that old vista 10 E board laying around so I thought I would put it
> in. System is very small   3 doors and 1 motion.
>
> I wanted to have it working so when people look to buy, they see that it
> works.
>
> I did something in programing and I couldnt get out so I shut it off...
> Now the master code does not work. Now when I power the board up, its in
> the Arm state and I cant get into programming. I tried connecting with a
> downloading computer but it wont pick up...   * plus # does not work
> during power up since its armed....
>
> Anyone any ideas on how to fix my booo boooo?
>
> I have an ADT Vista 20 here... I might install it.. but I wanted to use
> the 10 because if the new people wanted service, I could just call it up
> to program...
>
>
> Matthew
>
> "Robert L Bass" <robertbass1@xxxxxxxxxxx> wrote in message
> news:wsWdnQvMWpTc6hXYnZ2dnUVZ_q-vnZ2d@xxxxxxxxxxxxxx
>>> Addition of new 5800 series transmitters with
>>> this control panel is prohibited, other than for
>>> repair of existing installations. Non-permitted
>>> use voids U.S. warranty.
>>
>> If the panel is that old, the warranty has long since expired anyway.
>> However, they wrote that because 5the 5800 series receivers were not
>> compatible with the older panels.  Whether the current 5800 receivers
>> will work with it is another question.  I don't know for sure thoiugh I
>> suspect the answer is no.  If jno one tells you for sure by morning, I'll
>> ask my Honeywell rep.
>>
>> --
>>
>> Regards,
>> Robert L Bass
>>
>> =============================>
>> Bass Home Electronics
>> 941-866-1100
>> 4883 Fallcrest Circle
>> Sarasota · Florida · 34233
>> http://www.bassburglaralarms.com
>> =============================>
>>
>
>