Re: Help with PL513 X10 Connection to Lynx-R

[G. Morgan <alarmpro@xxxxxxxxxxx>]

On Sat, 26 Aug 2006 16:25:39 -0700, "Jack" <jack@xxxxxxxxxxxxx> wrote:

>I have a Powerline PL513, which came with my Lynx-R panel and on the last
>page of the Installation and Setup Guide it shows three connections going to
>the Panel at connections 9, 13 and 14. The PL513 has four wires coming from
>it. The yellow goes to 13, Black to 14 and it shows red and green being
>joined and then connected to 9. I am not an electrician so I don't know what
>the symbol means when two wires join at a point and then one connection is
>made to the panel. Does this mean that I should connect the green OR red
>wire to terminal 9, or should I connect the red AND green wires to terminal
>9?
>
>


It means connect both.