Re: Help with PL513 X10 Connection to Lynx-R

["Jack" <jack@xxxxxxxxxxxxx>]

"G. Morgan" <alarmpro@xxxxxxxxxxx> wrote in message
news:cpm1f295u3153r7l0grrb6uc288i0n7soo@xxxxxxxxxx
> On Sat, 26 Aug 2006 16:25:39 -0700, "Jack" <jack@xxxxxxxxxxxxx> wrote:
>
> >I have a Powerline PL513, which came with my Lynx-R panel and on the last
> >page of the Installation and Setup Guide it shows three connections going
to
> >the Panel at connections 9, 13 and 14. The PL513 has four wires coming
from
> >it. The yellow goes to 13, Black to 14 and it shows red and green being
> >joined and then connected to 9. I am not an electrician so I don't know
what
> >the symbol means when two wires join at a point and then one connection
is
> >made to the panel. Does this mean that I should connect the green OR red
> >wire to terminal 9, or should I connect the red AND green wires to
terminal
> >9?
> >
> >
>
>
> It means connect both.
>

George, first of all I appreciated your answere. Is there any documentation
to validate what you have posted or is this based on your experience with
this device? I know we're on the honor system here, but it's never wrong to
verify information.