Re: GEO-Vision DVRs

["paterson" <paterson@xxxxxxxxxxx>]

You can configure GeoVision web cam server to run on a different port beside
port 80. However, you need to specific the port number when using IE for
remote viewing. Hope this help.

--
Best Regards,
Paterson Poh
www.srpl.biz
"gymfolks" <gymfolks@xxxxxxxxxxx> wrote in message
news:7wZ%f.41542$_26.11144@xxxxxxxxxxxxxxxxxxxxxxx
> Bob,
> The Geo WebServer can be set up to automatically start whenever the Geo
> system is running (so your OK here).  Also, the is a DNS application that
> can also be set to start in a similiar fashion (after you register your
> name with a free DNS service - if the Geo machine is NOT on a static IP
> address).
>
> Then just open up IE and type in    http:\\YOUR_NAME_HERE.COM  and the Geo
> application will come up in IE.  You can remote view, remote play back or
> even take remote desktop control (if password allow etc).
>
> Port 80 needs to be open for veiw or playback to work.  Hope this helps
> some.
>
>
>
> "Bob La Londe" <usenet@xxxxxxxxxxxxxxxxx> wrote in message
> news:443fd253$0$14502$6d36acad@xxxxxxxxxxxxxxxxxxxxxxxx
>> "Gymfolks" <gymfolks@xxxxxxxxxxx> wrote in message
>> news:123vigr1pbt1u67@xxxxxxxxxxxxxxxxxxxxx
>>> Yes.
>>
>> I I should be able to set the little server application up to run at boot
>> time on each of his Geo-Vision boxes, set it up, and then goto the remote
>> site and enter:
>>
>> the.site.ip.address:port
>>
>> in a browser window and be good to go?
>>
>> Correct router configuration, ActiveX programs, etc not withstanding of
>> course.
>>>
>>>
>>> "Bob La Londe" <usenet@xxxxxxxxxxxxxxxx> wrote in message
>>> news:xMCdnYczWt6iP6PZRVn-sg@xxxxxxxxxxxxxxx
>>> > "Doug L" <vssdoug@xxxxxxx> wrote in message
>>> > news:k5u%f.120$_m5.33@xxxxxxxxxxxxx
>>> > > Use the webcam software for remote viewing, its much better than the
>>> > remote
>>> > > view software, the first time you connect to the machine remotely
>>> > > you
>>> will
>>> > > be able to download the required browser plugin to the remote
>>> > > machine.
>>> > >
>>> > > You may need to adjust the settings on the remote machine to allow
>>> > > the
>>> > > unsigned active X from the host machine to download
>>> > >
>>> > >
>>> > >
>>> > > Doug L
>>> > >
>>> >
>>> >
>>> > Can you review recorded video etc using the webcam setting?
>>> >
>>> >
>>> > --
>>> > The Security Consultant
>>> > Bob La Londe - Owner
>>> > 849 S Ave C
>>> > Yuma, Az 85364
>>> >
>>> > (928)782-9765 ofc
>>> > (928)782-7873 fax
>>> >
>>> >
>>> >
>>> >
>>>
>>>
>>
>>
>> *** Posted via a free Usenet account from http://www.teranews.com ***
>
>