[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

CCTV Modulation Wiring



I have been searching hard for a reference or discussion for what I want to
do, but so far no luck and I am still puzzled.  I hope someone here will
steer me right.

I want to install up to 4 CCTV cameras for home security.  Running cable is
no problem (I have already run a cable package that includes 18-4/Cat5e/RG-6
Quad to each location).  I do not require VCR capability or alarm tie-in
just now.

I presently have a ChannelPlus DA-8200-BID distro amplifier feeding the
video network from a central control panel.  The "B" mod port is used for a
ChannelPlus 4 port modulator from the media room.  I want to use the
ChannelPlus "A" mod port for the CCTV cameras.

Question:  Is there a "box" into which I can feed the 4 camera leads, and
from which I can feed the ChannelPlus "A" port, so that I can view the CCTV
camera output on any display device on the network?  Is a standard
multiplexer sufficient?

--
Good luck and good sailing.
s/v Kerry Deare of Barnegat
http://home.comcast.net/~kerrydeare





alt.security.alarms Main Index | alt.security.alarms Thread Index | alt.security.alarms Home | Archives Home