[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Fire Alarm Faulty - End Of Line Device???

Subject: Fire Alarm Faulty - End Of Line Device???
From: Richard Faulkner <richard@xxxxxxxxxxxxxxxxxx>
Date: Fri, 14 Oct 2005 15:36:20 +0100
Newsgroups: alt.security.alarms

I posted a while ago re: problems with the Fire Alarm system in a block
of 7 flats, and have now established the following:

Panel - MFP Range 4-28 Zone Fire Alarm Control Panel.

End of Line Device specified 6k8ohms

End Of Line Devices supplied are ZF19 which seem to be 8k2ohms.

Presumably, the ZF19 will not be suitable, and has been wrongly
supplied?

Any ideas welcomed

--
Richard Faulkner

Follow-Ups:
- Re: Fire Alarm Faulty - End Of Line Device???
  - From: Bill
- Re: Fire Alarm Faulty - End Of Line Device???
  - From: Frank Olson

Prev by Message: Re: Brinks security system is dead
Next by Message: Re: Problem with ADT Security Company
Previous by thread: Itec Horizon Panel engineering manual
Next by thread: Re: Fire Alarm Faulty - End Of Line Device???
Index(es):
- Message
- Thread

alt.security.alarms Main Index | alt.security.alarms Thread Index | alt.security.alarms Home | Archives Home