[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

2. Discover Wireless Alarm System.. >



My wireless alarm system was "deaf" and "dead" during the use of an
FCC like authorized low range and power wireless radio "headphone",
that simple...

Unfortunately this authority authorized and certified device
transmitted on the shared and not protected wireless alarm system
frequency, a lot of "other" low power transmitters have the same bad
effect.
: It muzzle any possible incoming signals from the sensors.


This problem is well known in telecommunication and is called "Radio
Frequency Interference" (RFI).
 This wireless headphone story shows me how EASY and SIMPLE it is to
have the operations of any wireless alarm system jeopardized
completely from the outside.
 There are identifications codes present in the sensor transmissions
but during RFI the receiver output goes bingo and the ID's are
undecodable, the system is just useless.
 The system does no longer detected FIRE and/or INTRUSION; the
receiver is "deaf" and "dead" on alarm giving.

This is applicable to OLD and NEW equipments, the receiver is unable
to refuse the RFI signals only and keep the sensor data, he jam
everything even the RFI detection and alarm giving.

Think it over before you keep or get a wireless alarm system.
 I know, this problem happens only to others but you..

Paul



alt.security.alarms Main Index | alt.security.alarms Thread Index | alt.security.alarms Home | Archives Home