[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: RLB NX8E and Shabbat



You can easlily disable the Leds usually by a jumper in each detector. Or
you can switch the power to detectors using a relay connected and programmed
to activate to folllow the Armed Light. Extend the exit delay to allow for a
warm up period when you arm the system and you've done it. There are
probably a lot of good reasons NOT to do this though, but it is an easy fix.

Paul

"Crash Gordon®" <webmaster@xxxxxxxxxxxxxxxxxxxxx> wrote in message
news:FAdhe.48$H85.1046@xxxxxxxxxxxxxxxxxx
Dunno much about it...sounds like if they can't see it operating then it's
ok ?


"Mark Leuck" <m..leuck@xxxxxxxxxxx> wrote in message
news:ypudnZF1DvxS_hjfRVn-gg@xxxxxxxxxxxxxx
>
> "Crash Gordon®" <webmaster@xxxxxxxxxxxxxxxxxxxxx> wrote in message
> news:3m3he.16$H85.423@xxxxxxxxxxxxxxxxxx
> Black electrical tape?
>
> Interesting problem. This was discussed here a few weeks ago, dunno if any
> of the threads are still around.
>
> I can't help but wonder if they also turn off things like the fridge or
> hot
> water heater?
>
> Stupid religion if you ask me
>
>
>




alt.security.alarms Main Index | alt.security.alarms Thread Index | alt.security.alarms Home | Archives Home