Re: Noob question on Compass

[Crash Gordon® <webmaster@xxxxxxxxxxxxxxxxxxxxx>]

Here's the list of supported modems:

The following modems are supported and need no
configuration:
=95 Hayes Optima 336 External
=95 Hayes Smartmodem 2400
=95 Hayes Smartmodem Optima 2400 Fax96
=95 Cardinal MB 2400EX
=95 ADEMCO CIA 2400
The following modems are supported and need to be
configured (DIP switches):
=95 Hayes Smartmodem 1200 with volume external
=95 Hayes Smartmodem 1200 External Modem
=95 Hayes Smartmodem 1200B Internal Modem
(Rev.1.2 or higher)
Only the external Hayes Optima 336 is a
compatible modem. The internal model
will not work with this product.

I can't find anything else right now...I think you're gonna have to =
experiment some.


"Crash Gordon=AE" <webmaster@xxxxxxxxxxxxxxxxxxxxx> wrote in message =
news:q%Sle.293$AW2.3503@xxxxxxxxxxxxxxxxxx
When you downloaded the Compass software there is also a pdf manual with =
the modem settings. I've never had much luck with anything but the CIA =
modem though so can't tell ya what the setting for the PM1200 is, if I =
go to the office tomorrow I see if I have info there.

When you contact panel the you can set it to Answer Machine disable, =
which rings the phone line once, hangs up and redials automatically =
about 10 seconds later the panel pickup automatically.

If you want the panel can call you back, just depends on how you want =
it. I always program both 15 and the dialback phone number.


"Foo Bar" <billcolabs@xxxxxxxxxxxxx> wrote in message =
news:spPle.2407$rY6.12@xxxxxxxxxxxxxxxxxxxxxxxxxxxxx
> I hope this isn't too stupid a question an if there is a better=20
> refernce, please let me know....
>=20
> I DIY installed an Ademco Vista 20P system for my home. All =
programming=20
> was via the keypad and it went fairly well, but seems to be a bit=20
> tedious. I noticed that the Compass software was available so I got a=20
> copy and installed it on by XP windows box.
>=20
> The first problem was the modem. I believt that the panel communicates =

> via DTMF tones rather than any standard modem protocol. A quick look =
at=20
> supported modems sent me to ebay to get something old enough to work. =
I=20
> got a practical Peripherals PM1200SA mini that was advertised as being =

> Compass complient.
>=20
> The first question is about the 10 DIP switches on the bottom. What is =

> the correct setting for use with Compass?
>=20
> Second, what is the modem type in compass or what is the correct AT=20
> strings for this modem?
>=20
> Third, the alarm is on the main phone line and the modem is on the fax =

> line to allow phone connection. Field *95 (ring count) with an answer=20
> machine, downloading and no phone module shows a ring count of 15 =
(which=20
> I set). My question is "how does a ring count of 15 byppass the answer =

> machine, when it picks up on the 4th ring?"
>=20
> Forth (and last), *94 is used to set the download phone number, which =
I=20
> set the fax/PC number. Does compass work by calling the panel, sendin=20
> some info and then having the panel call the compass CPU?
>=20
> Thanks for any insight (or pointers) you can give me.