Re: Bosch Programming Nibbles

["jamie-" <sjames@xxxxxxxxxx>]

sounds like a 6412
you can program it by pc. (using bosch's rps software.

BUT MY ADVICE: PULL IT!

i installed a bunch of these.
you don't want to deal with this panel.
pull it and find something that's easier to install and service.
7212G is in the same ballpark and is a real panel.



Mark Leuck wrote:
> Which Bosch system did you put in?
>
> "Andrew Buchanan" <drewber@xxxxxxxxxxxx> wrote in message
> news:Bzn%d.1027$nK.211286@xxxxxxxxxxxxxxxxxxxxxxxx
> > Hey,
> >
> > Anyone out there familiar with Bosch Systems?  We just put one in
and
> found
> > that it was such a pain in the ass to program.  Everything used
what the
> > book called 'nibbles'.  In order to program the access code 1234,
you
> needed
> > to go through multiple levels of 'nibbles' taking three or four
keystrokes
> > just to get the digit '1' to show up on the keypad.  Than repeat
for each
> > one, unlike a DSC where you could just punch in '1234' and be done
with
> it.
> >
> > The customer laughed and asked why it was so difficult, and why we
didn't
> > just put in a DSC like at there other offices.  Thankfully, we
we're only
> > the subs on this job and everything was speced and approved
elsewhere.
> >
> > When we set this system up, did we miss something?  Sadly, I don't
have
> the
> > full system name with now.
> >
> > Thanks,
> >
> > Andrew Buchanan
> > Novatech Systems
> >
> >