[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: Troubleshooting Question

Subject: Re: Troubleshooting Question
From: "Mark Leuck" <m..leuck@xxxxxxxxxxx>
Date: Sat, 18 Jun 2005 12:46:09 -0500
Newsgroups: alt.security.alarms
References: <ZQAse.1870$Nz2.84@xxxxxxxxxxxxxxxxxxxxxxxxxx> <CdBse.1720214$Xk.155393@pd7tw3no> <uoBse.7$zF5.2005@xxxxxxxxxxxxxxx> <GMKse.1359$eV4.610@fed1read01> <qmLse.51$BD.15513@xxxxxxxxxxxxxxx> <0qWse.2696$ks4.940@xxxxxxxxxxxxxxxxxxxxxxxxxx>

"J P Shull III" <jpshull@xxxxxxxxxx> wrote in message
news:0qWse.2696$ks4.940@xxxxxxxxxxxxxxxxxxxxxxxxxxxxx
> Great Answer!!!
> I usually check the magnets for alignment first as suggested.  I wonder
what
> the resistence should be?  I use a toner to check continuity and determine
> which cable is which opening.
> Most of these are Prewires done by the company that does more than any
other
> in the US.  About 70% of them have problems.
> Thanks again!!!
> JP

Ranger American?

References:
- Troubleshooting Question
  - From: J P Shull III
- Re: Troubleshooting Question
  - From: Frank Olson
- Re: Troubleshooting Question
  - From: Crash Gordon®
- Re: Troubleshooting Question
  - From: alarman
- Re: Troubleshooting Question
  - From: Crash Gordon®
- Re: Troubleshooting Question
  - From: J P Shull III

Prev by Message: Re: Flex Pass Cards - Need Some?
Next by Message: Re: Glass skylights
Previous by thread: Re: Troubleshooting Question
Next by thread: Garage Protection with Pets
Index(es):
- Message
- Thread

alt.security.alarms Main Index | alt.security.alarms Thread Index | alt.security.alarms Home | Archives Home