Re: CADDX NX-8

[joe <nospam@xxxxxx>]

Jim Rojas wrote:
> Brinks uses speakers, not self contained sirens. You can either install a
> siren driver, or replace it. Your smoke detector should be compatible if it
> is a 4 wire smoke.
>
> Jim Rojas
>
> <jeremy_ho@xxxxxxxxxxx> wrote in message
> news:1121710756.879528.109380@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
>
>>I am an home owner with an existing brinks system in my home that
>>previous owner put in 5 years ago.
>>
>>I am going to remove the brinks system but use the existing wiring and
>>the door/window sensors.   I will replace the control panel and keypad.
>>Is it possible to reuse the siren and smoke detector from the brinks
>>system?
>>
>>I have looked at a few options and I am thinking of getting the CADDX
>>NX-8 with the NX-148E control panel.
>>
>>Any opinions about this unit? I will be doing the replacement myself
>>and possibly with the support from the vendor I am getting it from, and
>>this NG.
>>
>>Initially I will be using it as a local system but definitely would
>>consider monitoring service in the future.
>>
>
>
>
caddx uses spks also.  or can be selected for voltage out in program.