[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: Napco EZM-8 new install causing "E12-01 SERVICE" error on keypads

Subject: Re: Napco EZM-8 new install causing "E12-01 SERVICE" error on keypads
From: Robert L Bass <sales@xxxxxxxxxxxxxxxxxxxxx>
Date: Sat, 30 Jul 2005 05:02:59 -0400
Newsgroups: alt.security.alarms
References: <1121194294.002068.179340@xxxxxxxxxxxxxxxxxxxxxxxxxxxx> <1121221558.923729.268910@xxxxxxxxxxxxxxxxxxxxxxxxxxxx>

> Problem resolved.  I had an EZM keypad address set to 01.  I set the
> EZM-8 to address 01, then changed the 2 keypads to addresses 03 and 04
> to resolve the issue.
>
> Thanks to all for pointing me in the correct direction.

You're most welcome.

--

Regards,
Robert L Bass
http://www.BassBurglarAlarms.com

References:
- Napco EZM-8 new install causing "E12-01 SERVICE" error on keypads
  - From: cmjindy
- Re: Napco EZM-8 new install causing "E12-01 SERVICE" error on keypads
  - From: cmjindy

Prev by Message: Re: nev
Next by Message: Re: Problems with SBC ADSL services
Previous by thread: Re: Napco EZM-8 new install causing "E12-01 SERVICE" error on keypads
Next by thread: Newbie Door Contact Question
Index(es):
- Message
- Thread

alt.security.alarms Main Index | alt.security.alarms Thread Index | alt.security.alarms Home | Archives Home