[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: relocate existing alarm panel.

Subject: Re: relocate existing alarm panel.
From: "alarman" <alarman2000@xxxxxxxxx>
Date: Mon, 26 Dec 2005 20:04:58 -0800
Newsgroups: alt.security.alarms
References: <tj2sf.3587$bd.3219@xxxxxxxxxxxxxxxxxxxxxxx> <aJ2sf.9478$xF6.5752@fed1read01> <43B0BA0F.1080402@xxxxxxxxxxxxxxxx>

"James Russo" <jr@xxxxxxxxxxxxxxxx> wrote in message
news:43B0BA0F.1080402@xxxxxxxxxxxxxxxxxxx
>
> > You can certainly use the existing can as a J box. Just be sure to
document
> > it's location at the main panel, and label all wiring clearly at both
ends.
> > I would punch everything down on a 66 block, assuming solid conductors.
This
> > makes future troubleshooting a snap.
>
> I was planning on just using standard B-connectors. It's a mix of
> solid/strand wires. Don't ask. I didn't install it.

Ha! Been there. Beans are ok, just make good connections and label clearly.

js

Follow-Ups:
- Re: relocate existing alarm panel.
  - From: robertlbass

References:
- relocate existing alarm panel.
  - From: James Russo
- Re: relocate existing alarm panel.
  - From: alarman
- Re: relocate existing alarm panel.
  - From: James Russo

Prev by Message: Re: Girsh Alarm in Philly, PA lousy treatment of potential employee
Next by Message: Re: Running wire for security cameras, and tips on fishing wire?
Previous by thread: Re: relocate existing alarm panel.
Next by thread: Re: relocate existing alarm panel.
Index(es):
- Message
- Thread

alt.security.alarms Main Index | alt.security.alarms Thread Index | alt.security.alarms Home | Archives Home