[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: Factory Default for Napco 1016e?

Subject: Re: Factory Default for Napco 1016e?
From: Robert L Bass <sales@xxxxxxxxxxxxxxxxxxxxx>
Date: Sat, 27 Aug 2005 21:19:20 -0400
Newsgroups: alt.security.alarms
References: <1125175321.306116.308770@xxxxxxxxxxxxxxxxxxxxxxxxxxxx>

> I'm getting ready to replace an older Napco MA1016e with
> a newer Ademco Vista 15P panel.  Before I remove the
> Napco, I'd like to set it back to factory defaults.  Is there
> an easy way to do this (I have the installer code)?  I can
> remove all of the values using Napco Quickloader software,
> but I'm hoping there is an even easier way to do it.

Create a new "account" with the software.  Don't enter any
information in it.  Download it to the panel.

> Lastly, what is the default installer code for these old
> Napco panels?

It's been a while since I worked on a 1016e but ISTR it's 456789,
same as several other Napco panels.
--

Regards,
Robert L Bass

Bass Burglar Alarms
The Online DIY Store
http://www.BassBurglarAlarms.com

Follow-Ups:
- Re: Factory Default for Napco 1016e?
  - From: rahouston@xxxxxxxxxxx

References:
- Factory Default for Napco 1016e?
  - From: rahouston@xxxxxxxxxxx

Prev by Message: Re: PIR motion detector on screen porch?
Next by Message: Re: VCR Record on off
Previous by thread: Re: Factory Default for Napco 1016e?
Next by thread: Re: Factory Default for Napco 1016e?
Index(es):
- Message
- Thread

alt.security.alarms Main Index | alt.security.alarms Thread Index | alt.security.alarms Home | Archives Home