[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: Adding a third keypad to a Caddx NX-8, wiring help requested!

Subject: Re: Adding a third keypad to a Caddx NX-8, wiring help requested!
From: cctvbahamas@xxxxxxxxxxx
Date: 20 Aug 2005 23:05:32 -0700
Newsgroups: alt.security.alarms
References: <1124325989.739589.202500@xxxxxxxxxxxxxxxxxxxxxxxxxxxx> <DZRMe.22479$Rm3.14481@xxxxxxxxxxxxxxxxxxxxxx> <vm5dg1hvefdfv7fl9n761ghr2m33a814qm@xxxxxxx> <GGwNe.25779$Rm3.2307@xxxxxxxxxxxxxxxxxxxxxx> <gdodg1t9n7ee4bplp970pflamr99gg5h3j@xxxxxxx> <YwRNe.69890$UH.1279220@xxxxxxxxxxxxxxxxxxx> <i26gg1tntd24o6cjj0f054bh6ladonv616@xxxxxxx>

why is everyone talking about using twisted pair for alarm hardware ...
??

Telco wire is all yah need .. :-)

Never had an issue with keypads using Telco wire, besides the
occasional one that would give an issue at time of installation where
the solid 24AWG wire would break after bending it a couple times ...
and was fixed then and never had a problem again.

Its not like you are sending video ... just keep away from high
voltage..

Follow-Ups:
- Re: Adding a third keypad to a Caddx NX-8, wiring help requested!
  - From: Robert L Bass
- Re: Adding a third keypad to a Caddx NX-8, wiring help requested!
  - From: Crash Gordon

References:
- Adding a third keypad to a Caddx NX-8, wiring help requested!
  - From: brim
- Re: Adding a third keypad to a Caddx NX-8, wiring help requested!
  - From: joe
- Re: Adding a third keypad to a Caddx NX-8, wiring help requested!
  - From: Robert L Bass
- Re: Adding a third keypad to a Caddx NX-8, wiring help requested!
  - From: Karl Magnus
- Re: Adding a third keypad to a Caddx NX-8, wiring help requested!
  - From: Robert L Bass
- Re: Adding a third keypad to a Caddx NX-8, wiring help requested!
  - From: petem
- Re: Adding a third keypad to a Caddx NX-8, wiring help requested!
  - From: Robert L Bass

Prev by Message: Re: Graham MIA?
Next by Message: Re: Sentrol RCR-PET chirping on detect...how to stop or recommend another motion sensor?
Previous by thread: Re: Adding a third keypad to a Caddx NX-8, wiring help requested!
Next by thread: Re: Adding a third keypad to a Caddx NX-8, wiring help requested!
Index(es):
- Message
- Thread

alt.security.alarms Main Index | alt.security.alarms Thread Index | alt.security.alarms Home | Archives Home