[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: Contact ID with Napco 1016e?

Subject: Re: Contact ID with Napco 1016e?
From: "Crash Gordon" <webmaster@xxxxxxxxxxxxxxxxxxxxx>
Date: Fri, 26 Aug 2005 17:38:02 -0700
Newsgroups: alt.security.alarms
References: <1125065320.777867.94290@xxxxxxxxxxxxxxxxxxxxxxxxxxxx> <5wFPe.26$um2.8@trnddc03> <1125067953.481884.227370@xxxxxxxxxxxxxxxxxxxxxxxxxxxx> <N2GPe.42$qg2.28@trnddc05> <1125089697.183566.66350@xxxxxxxxxxxxxxxxxxxxxxxxxxxx> <BLLPe.493$Uz2.33@trnddc02> <1125097917.560163.259010@xxxxxxxxxxxxxxxxxxxxxxxxxxxx>

Whatever you want them to be - you make up the codes and tell your cs what
you're gonna use. If your gonna use old formats on other panels stick to one
setup and your cs should be able to build a template for ya.

whatever you want....
60's for restores.
50's for shunts
30-49 for burgs




"rahouston@xxxxxxxxxxx" <rahouston@xxxxxxxxx> wrote in message
news:1125097917.560163.259010@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
> Jim:
>
> The one thing I seem to be missing for my 4X2 report codes is restore
> codes.  Are restore codes generally used by Central Stations?
>
> Thanks again,
>
> Rob
>

References:
- Contact ID with Napco 1016e?
  - From: rahouston@xxxxxxxxxxx
- Re: Contact ID with Napco 1016e?
  - From: Jim Rojas
- Re: Contact ID with Napco 1016e?
  - From: rahouston@xxxxxxxxxxx
- Re: Contact ID with Napco 1016e?
  - From: Jim Rojas
- Re: Contact ID with Napco 1016e?
  - From: rahouston@xxxxxxxxxxx
- Re: Contact ID with Napco 1016e?
  - From: Jim Rojas
- Re: Contact ID with Napco 1016e?
  - From: rahouston@xxxxxxxxxxx

Prev by Message: Re: Adding a third keypad to a Caddx NX-8, wiring help requested!
Next by Message: Re: lack of support at Home Technology Store
Previous by thread: Re: Contact ID with Napco 1016e?
Next by thread: Re: Contact ID with Napco 1016e?
Index(es):
- Message
- Thread

alt.security.alarms Main Index | alt.security.alarms Thread Index | alt.security.alarms Home | Archives Home