[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: Contact ID with Napco 1016e?

Subject: Re: Contact ID with Napco 1016e?
From: "Jim Rojas" <jrojas@xxxxxxxxxxxx>
Date: Fri, 26 Aug 2005 14:54:37 GMT
Newsgroups: alt.security.alarms
References: <1125065320.777867.94290@xxxxxxxxxxxxxxxxxxxxxxxxxxxx> <5wFPe.26$um2.8@trnddc03> <1125067953.481884.227370@xxxxxxxxxxxxxxxxxxxxxxxxxxxx>

Make sure the respective BURG or FIRE wording under report codes is present
on each zone. Otherwise the signals will not be sent.

Jim Rojas


"rahouston@xxxxxxxxxxx" <rahouston@xxxxxxxxx> wrote in message
news:1125067953.481884.227370@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
> Thanks, Jim, I think there is an Ademco option there.  I'll give it a
> try.
>
> Rob
>

Follow-Ups:
- Re: Contact ID with Napco 1016e?
  - From: rahouston@xxxxxxxxxxx

References:
- Contact ID with Napco 1016e?
  - From: rahouston@xxxxxxxxxxx
- Re: Contact ID with Napco 1016e?
  - From: Jim Rojas
- Re: Contact ID with Napco 1016e?
  - From: rahouston@xxxxxxxxxxx

Prev by Message: Re: Wireless receiver - computer problem?
Next by Message: Re: Radio Shack Safe House 49-450B Manual
Previous by thread: Re: Contact ID with Napco 1016e?
Next by thread: Re: Contact ID with Napco 1016e?
Index(es):
- Message
- Thread

alt.security.alarms Main Index | alt.security.alarms Thread Index | alt.security.alarms Home | Archives Home