[Message Prev][Message
Next][Thread Prev][Thread Next][Message
Index][Thread Index]
Re: Re: All Stopped
See below
----- Original Message -----
From: Mal Lansell
To: ukha_xpl@xxxxxxx
Sent: Tuesday, October 11, 2005 4:43 PM
Subject: Re: [ukha_xpl] Re: All Stopped
OK, well the next thing to do would be to turn off the hub in xPLHal -
make sure the service gets restarted too.
Did this
Quit xPLHal Manager and run it again. There should be no working
devices any more.
Correct - no devices present
Then install the xPLHub from xplmonkey.com
DId this.
Quit xPLHal Manager and run it again - everything should be working again.
No workging devices show up - Also no devices to be configured.
Rebooted - No change.
Disabled the xPLHub and re enabled the built in hub
All devices now showing in the working device window.
What port number is the hub trying to use. I have the firewall turned off
right now and have the following ports being forwarded in my router.
3865
5000 through 5009
Would it be trying to use some other one?
If this works, then reinstall the new W800 service...
George M wrote:
> Your going to love this.
> As soon as I uninstalled the newer W800 and installed the older
> version -- It was found and configured right away.
> This is still using the built in hub - not the stand alone. Thought I
> would solve one thing at a time.
>
> George
> ----- Original Message -----
> From: Mal Lansell
> To: ukha_xpl@xxxxxxx
> Sent: Tuesday, October 11, 2005 1:50 PM
> Subject: Re: [ukha_xpl] Re: All Stopped
>
>
> Well in that case it should all "just work" :-(
>
> I'm going to have to do some tests here, but I'm sure there are
quite a
> few people already using my new hub and W800 service quite happily
> (Frank?)
>
> In the meantime, you can still download the old w800 service from
here:
> http://www.lansell.org/mal/ha/ha_downloads.shtml
>
> Mal
>
>
> George M wrote:
>
> > Broadcast:
> > 255.255.255.255
> >
> > ListenOn
> > Any_Local
> >
> > ListenTo
> > Any
> >
> >
> > Thanks
> > George
> > ----- Original Message -----
> > From: Mal Lansell
> > To: ukha_xpl@xxxxxxx
> > Sent: Tuesday, October 11, 2005 10:57 AM
> > Subject: [ukha_xpl] Re: All Stopped
> >
> >
> > In xPLHal Manager, could you look under Tools/Network
Settings, and
> > let us know what the Broadcast, ListenOn and ListenTo
addresses are
> > set to?
> >
> > Thanks
> >
> > Mal
> >
> > --- In ukha_xpl@xxxxxxx, "George M"
<gmotichka@h...> wrote:
> > >
> > > Tom,
> > >
> > > I only have one network card.
> > >
> > > Mal,
> > >
> > > What I cannot figure out (and admittedly I am a novice
with XPL),
> > is that with the internal hub active all the devices are seen
except
> > the new W800. With the stand alone hub, no devices are seen.
Before
> > I installed the new W800, it worked well with internal hub-
with the
> > new one it does not seem to respond to the request for
> configuration.
> > >
> > > I replace the older W800 install program. Can I still
get a copy
> > of it to see if it will still work?
> > >
> > > George M
> > > ----- Original Message -----
> > > From: Mal Lansell
> > > To: ukha_xpl@xxxxxxx
> > > Sent: Tuesday, October 11, 2005 7:11 AM
> > > Subject: [ukha_xpl] Re: All Stopped
> > >
> > >
> > > This is wierd. The problems that George mentioned
only occurred
> > on
> > > my own machine when a ListenOn address was specified,
and with
> > the
> > > built-in xPLHal hub.
> > >
> > > The new hub worked fine with everything I tested it
with...
> > >
> > >
> > > --- In ukha_xpl@xxxxxxx, Tom Van den Panhuyzen
> > <tomvdp@g...>
> > > wrote:
> > > >
> > > > Another idea: if you have multiple IP addresses
(multiple
> > network
> > > cards or
> > > > VMWare or VirtualPC installed...) then you need
to set a
> > > default "listenon"
> > > > address in the registry.
> > > > IIRC: [HKLM]\Software\xpl\ListenOn
> > > > hth,
> > > > Tom
> > > >
> > > > On 10/11/05, George M <gmotichka@h...>
wrote:
> > > > >
> > > > > Hi Mal,
> > > > >
> > > > > I got the hub from your site.
> > > www.xplmonkey.com<http://www.xplmonkey.com/>
> > > > >
> > > > > Also I did a full reboot after disabling the
internal hub
> > and
> > > installing
> > > > > the stand alone hub.
> > > > >
> > > > > Thanks
> > > > > George ME
> > > > > ----- Original Message -----
> > > > > From: Mal Lansell
> > > > > To: ukha_xpl@xxxxxxx
> > > > > Sent: Tuesday, October 11, 2005 12:36 AM
> > > > > Subject: Re: [ukha_xpl] All Stopped
> > > > >
> > > > >
> > > > > It sounds to me like the internal hub of
xPLHal didn't
> > actually
> > > get
> > > > > turned off - did you restart the xPLHal
service or reboot
> > after
> > > setting
> > > > > it to be disabled?
> > > > >
> > > > > Also, where did you get the hub from?
> > > > >
> > > > > Mal
> > > > >
> > > > >
> > > > >
> > > > > George M wrote:
> > > > >
> > > > > > Well, I thought it was time to upgrade
to all the latest
> > stuff
> > > going
> > > > > > around here. And of course now nothing
is working. Not
> > sure
> > > where to
> > > > > > start. Here is what I did.
> > > > > >
> > > > > > Installed the latest Manager 1.5
> > > > > > Uninstalled W800 and reinstalled with
the latest build
> > > > > > Installed the XPLHub (not the Java
version), and disabled
> > the
> > > hub in
> > > > > > XPLHal
> > > > > >
> > > > > > At first I had three instances of the
W800 in the manager
> > > window to be
> > > > > > configured. I could see in the monitor
that it was
> > requesting
> > > data,
> > > > > > but never got any back. Also no matter
how many times I
> > put
> > > info into
> > > > > > the configuration screen, none of it
stuck
> > > > > >
> > > > > > Rebooted
> > > > > >
> > > > > > Now nothing comes up in the manager,
either in the
> > configured
> > > or
> > > > > > waiting to be configured window, where
before I had
> > > > > >
> > > > > > XPLHomevision
> > > > > > XPL
> > > > > > XPLw800
> > > > > > XPLCM12
> > > > > >
> > > > > > I then disabled the XPLHUB and re
enabled the internal hub
> > of
> > > XPLHal
> > > > > >
> > > > > > Now Homevision, XPL and XPLcm12 are
back in the configured
> > > window.
> > > > > >
> > > > > > XPLW800 stays in the "to be
configured" window, even
> > though I
> > > put all
> > > > > > the information into it.
> > > > > > I now have two instances in the
"to be configured' window.
> > The
> > > one
> > > > > > with the new name and the default one.
> > > > > >
> > > > > > I am going to try to find a previous
version and see if it
> > > will work.
> > > > > > Any other ideas?
> > > > > >
> > > > > > George M
> > > > > >
> > > > > > [Non-text portions of this message have
been removed]
> > > > > >
> > > > > >
> > > > > >
> > > > > > xPL Links: http://www.xplproject.org.uk
> > http://www.xplhal.com
> > > > > > http://www.xpl.myby.co.uk
> > > > > > To Post a Message: ukha_xpl@xxxxxxx
> > > > > > To Subscribe:
ukha_xpl-subscribe@xxxxxxx
> > > > > > To Unsubscribe:
ukha_xpl-unsubscribe@xxxxxxx
> > > > > >
> > > > > >
> > > > > >
> > > > > > SPONSORED LINKS
> > > > > > Protocol analyzer
> > > > > > <
> > > > > http://groups.yahoo.com/gads?
> > >
> >
>
t=ms&k=Protocol+analyzer&w1=Protocol+analyzer&w2=Protocol+converter&w
> > >
> >
>
3=Sip+protocol&w4=Tcp&w5=Protocol+analysis&w6=Protocol&c=6&s=111&.sig
> > > =QulmGKu5OpHgigyaWFXqqA>
> > > > >
> > > > > > Protocol converter
> > > > > > <
> > > > > http://groups.yahoo.com/gads?
> > >
> >
>
t=ms&k=Protocol+converter&w1=Protocol+analyzer&w2=Protocol+converter&
> > >
> >
>
w3=Sip+protocol&w4=Tcp&w5=Protocol+analysis&w6=Protocol&c=6&s=111&.si
> > > g=_Gav_2JNLbgwjsCn8RqM-w>
> > > > >
> > > > > > Sip protocol
> > > > > > <
> > > > > http://groups.yahoo.com/gads?
> > >
> >
>
t=ms&k=Sip+protocol&w1=Protocol+analyzer&w2=Protocol+converter&w3=Sip
> > >
> >
>
+protocol&w4=Tcp&w5=Protocol+analysis&w6=Protocol&c=6&s=111&.sig=d2G6
> > > YVkW-P5WBFmpuWQ3Zw>
> > > > >
> > > > > >
> > > > > > Tcp
> > > > > > <
> > > > > http://groups.yahoo.com/gads?
> > >
> >
>
t=ms&k=Tcp&w1=Protocol+analyzer&w2=Protocol+converter&w3=Sip+protocol
> > >
> >
>
&w4=Tcp&w5=Protocol+analysis&w6=Protocol&c=6&s=111&.sig=9xqmZjMntiOfV
> > > EPLIpwKUg>
> > > > >
> > > > > > Protocol analysis
> > > > > > <
> > > > > http://groups.yahoo.com/gads?
> > >
> >
>
t=ms&k=Protocol+analysis&w1=Protocol+analyzer&w2=Protocol+converter&w
> > >
> >
>
3=Sip+protocol&w4=Tcp&w5=Protocol+analysis&w6=Protocol&c=6&s=111&.sig
> > > =j5RxaJ5TSW2NTgWhIna4qQ>
> > > > >
> > > > > > Protocol
> > > > > > <
> > > > > http://groups.yahoo.com/gads?
> > >
> >
>
t=ms&k=Protocol&w1=Protocol+analyzer&w2=Protocol+converter&w3=Sip+pro
> > >
> >
>
tocol&w4=Tcp&w5=Protocol+analysis&w6=Protocol&c=6&s=111&.sig=OPnkI6Ga
> > > dMASTgKewyeqDQ>
> > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> -----------------------------------------------------------
> > ----
> > > ---------
> > > > > > YAHOO! GROUPS LINKS
> > > > > >
> > > > > > * Visit your group "ukha_xpl
> > > > > > <http://groups.yahoo.com/group/ukha_xpl>"
on the web.
> > > > > >
> > > > > > * To unsubscribe from this group, send
an email to:
> > > > > > ukha_xpl-unsubscribe@xxxxxxx
> > > > > > <mailto:ukha_xpl-unsubscribe@xxxxxxx?
> > > subject=Unsubscribe>
> > > > > >
> > > > > > * Your use of Yahoo! Groups is subject
to the Yahoo! Terms
> > of
> > > > > > Service <http://docs.yahoo.com/info/terms/>.
> > > > > >
> > > > > >
> > > > > >
> -----------------------------------------------------------
> > ----
> > > ---------
> > > > > >
> > > > >
> > > > >
> > > > >
> > > > > xPL Links: http://www.xplproject.org.uk
> http://www.xplhal.com
> > > > > http://www.xpl.myby.co.uk
> > > > > To Post a Message: ukha_xpl@xxxxxxx
> > > > > To Subscribe: ukha_xpl-subscribe@xxxxxxx
> > > > > To Unsubscribe: ukha_xpl-unsubscribe@xxxxxxx
> > > > >
> > > > >
> > > > >
> > > > > SPONSORED LINKS Protocol analyzer Protocol
converter Sip
> > protocol
> > > > > Tcp Protocol analysis Protocol
> > > > >
> > > > >
> > > > >
> > > > >
> -------------------------------------------------------------
> > ----
> > > -------------
> > > > > YAHOO! GROUPS LINKS
> > > > >
> > > > > a.. Visit your group "ukha_xpl" on
the web.
> > > > >
> > > > > b.. To unsubscribe from this group, send an
email to:
> > > > > ukha_xpl-unsubscribe@xxxxxxx
> > > > >
> > > > > c.. Your use of Yahoo! Groups is subject to
the Yahoo! Terms
> > of
> > > Service.
> > > > >
> > > > >
> > > > >
> > > > >
> -------------------------------------------------------------
> > ----
> > > -------------
> > > > >
> > > > >
> > > > >
> > > > > [Non-text portions of this message have been
removed]
> > > > >
> > > > >
> > > > >
> > > > > xPL Links: http://www.xplproject.org.uk
> http://www.xplhal.com
> > > > > http://www.xpl.myby.co.uk
> > > > > To Post a Message: ukha_xpl@xxxxxxx
> > > > > To Subscribe: ukha_xpl-subscribe@xxxxxxx
> > > > > To Unsubscribe: ukha_xpl-unsubscribe@xxxxxxx
> > > > >
> > > > >
> > > > >
> > > > > SPONSORED LINKS
> > > > > Protocol analyzer<http://groups.yahoo.com/gads?
> > >
> >
>
t=ms&k=Protocol+analyzer&w1=Protocol+analyzer&w2=Protocol+converter&w
> > >
> >
>
3=Sip+protocol&w4=Tcp&w5=Protocol+analysis&w6=Protocol&c=6&s=111&.sig
> > > =QulmGKu5OpHgigyaWFXqqA> Protocol
> > > > > converter<http://groups.yahoo.com/gads?
> > >
> >
>
t=ms&k=Protocol+converter&w1=Protocol+analyzer&w2=Protocol+converter&
> > >
> >
>
w3=Sip+protocol&w4=Tcp&w5=Protocol+analysis&w6=Protocol&c=6&s=111&.si
> > > g=_Gav_2JNLbgwjsCn8RqM-w> Sip
> > > > > protocol<http://groups.yahoo.com/gads?
> > >
> >
>
t=ms&k=Sip+protocol&w1=Protocol+analyzer&w2=Protocol+converter&w3=Sip
> > >
> >
>
+protocol&w4=Tcp&w5=Protocol+analysis&w6=Protocol&c=6&s=111&.sig=d2G6
> > > YVkW-P5WBFmpuWQ3Zw>
> > > > > Tcp<http://groups.yahoo.com/gads?
> > >
> >
>
t=ms&k=Tcp&w1=Protocol+analyzer&w2=Protocol+converter&w3=Sip+protocol
> > >
> >
>
&w4=Tcp&w5=Protocol+analysis&w6=Protocol&c=6&s=111&.sig=9xqmZjMntiOfV
> > > EPLIpwKUg> Protocol
> > > > > analysis<http://groups.yahoo.com/gads?
> > >
> >
>
t=ms&k=Protocol+analysis&w1=Protocol+analyzer&w2=Protocol+converter&w
> > >
> >
>
3=Sip+protocol&w4=Tcp&w5=Protocol+analysis&w6=Protocol&c=6&s=111&.sig
> > > =j5RxaJ5TSW2NTgWhIna4qQ>
> > > > > Protocol<http://groups.yahoo.com/gads?
> > >
> >
>
t=ms&k=Protocol&w1=Protocol+analyzer&w2=Protocol+converter&w3=Sip+pro
> > >
> >
>
tocol&w4=Tcp&w5=Protocol+analysis&w6=Protocol&c=6&s=111&.sig=OPnkI6Ga
> > > dMASTgKewyeqDQ>
> > > > > ------------------------------
> > > > > YAHOO! GROUPS LINKS
> > > > >
> > > > >
> > > > > - Visit your
> > > group "ukha_xpl<http://groups.yahoo.com/group/ukha_xpl>"
> > > > > on the web.
> > > > > - To unsubscribe from this group, send
an email to:
> > > > > ukha_xpl-unsubscribe@xxxxxxx<ukha_xpl-
> > > unsubscribe@xxxxxxx?subject=Unsubscribe>
> > > > > - Your use of Yahoo! Groups is subject
to the Yahoo!
> > Terms of
> > > > > Service <http://docs.yahoo.com/info/terms/>.
> > > > >
> > > > >
> > > > > ------------------------------
> > > > >
> > > >
> > > >
> > > > [Non-text portions of this message have been
removed]
> > > >
> > >
> > >
> > >
> > >
> > >
> > >
> > > xPL Links: http://www.xplproject.org.uk http://www.xplhal.com
> > http://www.xpl.myby.co.uk
> > > To Post a Message: ukha_xpl@xxxxxxx
> > > To Subscribe: ukha_xpl-subscribe@xxxxxxx
> > > To Unsubscribe: ukha_xpl-unsubscribe@xxxxxxx
> > >
> > >
> > >
> > >
> -------------------------------------------------------------------
> > -----------
> > > YAHOO! GROUPS LINKS
> > >
> > > a.. Visit your group "ukha_xpl" on the
web.
> > >
> > > b.. To unsubscribe from this group, send an email
to:
> > > ukha_xpl-unsubscribe@xxxxxxx
> > >
> > > c.. Your use of Yahoo! Groups is subject to the
Yahoo! Terms
> > of Service.
> > >
> > >
> > >
> -------------------------------------------------------------------
> > -----------
> > >
> > >
> > >
> > > [Non-text portions of this message have been removed]
> > >
> >
> >
> >
> >
> >
> >
> > xPL Links: http://www.xplproject.org.uk http://www.xplhal.com
> > http://www.xpl.myby.co.uk
> > To Post a Message: ukha_xpl@xxxxxxx
> > To Subscribe: ukha_xpl-subscribe@xxxxxxx
> > To Unsubscribe: ukha_xpl-unsubscribe@xxxxxxx
> >
> >
> >
> >
>
------------------------------------------------------------------------------
> > YAHOO! GROUPS LINKS
> >
> > a.. Visit your group "ukha_xpl" on the web.
> >
> > b.. To unsubscribe from this group, send an email to:
> > ukha_xpl-unsubscribe@xxxxxxx
> >
> > c.. Your use of Yahoo! Groups is subject to the Yahoo!
Terms of
> > Service.
> >
> >
> >
>
------------------------------------------------------------------------------
> >
> >
> >
> > [Non-text portions of this message have been removed]
> >
> >
> >
> > xPL Links: http://www.xplproject.org.uk http://www.xplhal.com
> > http://www.xpl.myby.co.uk
> > To Post a Message: ukha_xpl@xxxxxxx
> > To Subscribe: ukha_xpl-subscribe@xxxxxxx
> > To Unsubscribe: ukha_xpl-unsubscribe@xxxxxxx
> >
> >
> >
>
------------------------------------------------------------------------
> > YAHOO! GROUPS LINKS
> >
> > * Visit your group "ukha_xpl
> > <http://groups.yahoo.com/group/ukha_xpl>"
on the web.
> >
> > * To unsubscribe from this group, send an email to:
> > ukha_xpl-unsubscribe@xxxxxxx
> >
> <mailto:ukha_xpl-unsubscribe@xxxxxxx?subject=Unsubscribe>
> >
> > * Your use of Yahoo! Groups is subject to the Yahoo! Terms
of
> > Service <http://docs.yahoo.com/info/terms/>.
> >
> >
> >
>
------------------------------------------------------------------------
> >
>
>
>
> xPL Links: http://www.xplproject.org.uk http://www.xplhal.com
> http://www.xpl.myby.co.uk
> To Post a Message: ukha_xpl@xxxxxxx
> To Subscribe: ukha_xpl-subscribe@xxxxxxx
> To Unsubscribe: ukha_xpl-unsubscribe@xxxxxxx
>
>
>
>
------------------------------------------------------------------------------
> YAHOO! GROUPS LINKS
>
> a.. Visit your group "ukha_xpl" on the web.
>
> b.. To unsubscribe from this group, send an email to:
> ukha_xpl-unsubscribe@xxxxxxx
>
> c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of
> Service.
>
>
>
------------------------------------------------------------------------------
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
> xPL Links: http://www.xplproject.org.uk http://www.xplhal.com
> http://www.xpl.myby.co.uk
> To Post a Message: ukha_xpl@xxxxxxx
> To Subscribe: ukha_xpl-subscribe@xxxxxxx
> To Unsubscribe: ukha_xpl-unsubscribe@xxxxxxx
>
>
>
> SPONSORED LINKS
> Protocol analyzer
> <http://groups.yahoo.com/gads?t=ms&k=Protocol+analyzer&w1=Protocol+analyzer&w2=Protocol+converter&w3=Sip+protocol&w4=Tcp&w5=Protocol+analysis&w6=Protocol&c=6&s=111&.sig=QulmGKu5OpHgigyaWFXqqA>
> Protocol converter
> <http://groups.yahoo.com/gads?t=ms&k=Protocol+converter&w1=Protocol+analyzer&w2=Protocol+converter&w3=Sip+protocol&w4=Tcp&w5=Protocol+analysis&w6=Protocol&c=6&s=111&.sig=_Gav_2JNLbgwjsCn8RqM-w>
> Sip protocol
> <http://groups.yahoo.com/gads?t=ms&k=Sip+protocol&w1=Protocol+analyzer&w2=Protocol+converter&w3=Sip+protocol&w4=Tcp&w5=Protocol+analysis&w6=Protocol&c=6&s=111&.sig=d2G6YVkW-P5WBFmpuWQ3Zw>
>
> Tcp
> <http://groups.yahoo.com/gads?t=ms&k=Tcp&w1=Protocol+analyzer&w2=Protocol+converter&w3=Sip+protocol&w4=Tcp&w5=Protocol+analysis&w6=Protocol&c=6&s=111&.sig=9xqmZjMntiOfVEPLIpwKUg>
> Protocol analysis
> <http://groups.yahoo.com/gads?t=ms&k=Protocol+analysis&w1=Protocol+analyzer&w2=Protocol+converter&w3=Sip+protocol&w4=Tcp&w5=Protocol+analysis&w6=Protocol&c=6&s=111&.sig=j5RxaJ5TSW2NTgWhIna4qQ>
> Protocol
> <http://groups.yahoo.com/gads?t=ms&k=Protocol&w1=Protocol+analyzer&w2=Protocol+converter&w3=Sip+protocol&w4=Tcp&w5=Protocol+analysis&w6=Protocol&c=6&s=111&.sig=OPnkI6GadMASTgKewyeqDQ>
>
>
>
>
------------------------------------------------------------------------
> YAHOO! GROUPS LINKS
>
> * Visit your group "ukha_xpl
> <http://groups.yahoo.com/group/ukha_xpl>"
on the web.
>
> * To unsubscribe from this group, send an email to:
> ukha_xpl-unsubscribe@xxxxxxx
> <mailto:ukha_xpl-unsubscribe@xxxxxxx?subject=Unsubscribe>
>
> * Your use of Yahoo! Groups is subject to the Yahoo! Terms of
> Service <http://docs.yahoo.com/info/terms/>.
>
>
>
------------------------------------------------------------------------
>
xPL Links: http://www.xplproject.org.uk http://www.xplhal.com http://www.xpl.myby.co.uk
To Post a Message: ukha_xpl@xxxxxxx
To Subscribe: ukha_xpl-subscribe@xxxxxxx
To Unsubscribe: ukha_xpl-unsubscribe@xxxxxxx
SPONSORED LINKS Protocol analyzer Protocol converter Sip protocol
Tcp Protocol analysis Protocol
------------------------------------------------------------------------------
YAHOO! GROUPS LINKS
a.. Visit your group "ukha_xpl" on the web.
b.. To unsubscribe from this group, send an email to:
ukha_xpl-unsubscribe@xxxxxxx
c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
------------------------------------------------------------------------------
[Non-text portions of this message have been removed]
xPL Main Index |
xPL Thread Index |
xPL Home |
Archives Home
|