Re: All Stopped

["Mal Lansell" <mal@xxxxxxxxxxx>]

In xPLHal Manager, could you look under Tools/Network Settings, and
let us know what the Broadcast, ListenOn and ListenTo addresses are
set to?

Thanks

Mal

--- In ukha_xpl@xxxxxxx, "George M" <gmotichka@h...> wrote:
>
> Tom,
>
> I only have one network card.
>
> Mal,
>
> What I cannot figure out (and admittedly I am a novice with XPL),
is that with the internal hub active all the devices are seen except
the new W800. With the stand alone hub, no devices are seen. Before
I installed the new W800, it worked well with internal hub- with the
new one it does not seem to respond to the request for configuration.
>
> I replace the older W800 install program. Can I still get a copy
of it to see if it will still work?
>
> George M
>   ----- Original Message -----
>   From: Mal Lansell
>   To: ukha_xpl@xxxxxxx
>   Sent: Tuesday, October 11, 2005 7:11 AM
>   Subject: [ukha_xpl] Re: All Stopped
>
>
>   This is wierd.  The problems that George mentioned only occurred
on
>   my own machine when a ListenOn address was specified, and with
the
>   built-in xPLHal hub.
>
>   The new hub worked fine with everything I tested it with...
>
>
>   --- In ukha_xpl@xxxxxxx, Tom Van den Panhuyzen
<tomvdp@g...>
>   wrote:
>   >
>   > Another idea: if you have multiple IP addresses (multiple
network
>   cards or
>   > VMWare or VirtualPC installed...) then you need to set a
>   default "listenon"
>   > address in the registry.
>   > IIRC: [HKLM]\Software\xpl\ListenOn
>   >  hth,
>   > Tom
>   >
>   >  On 10/11/05, George M <gmotichka@h...> wrote:
>   > >
>   > > Hi Mal,
>   > >
>   > > I got the hub from your site.
>   www.xplmonkey.com<http://www.xplmonkey.com/>
>   > >
>   > > Also I did a full reboot after disabling the internal hub
and
>   installing
>   > > the stand alone hub.
>   > >
>   > > Thanks
>   > > George ME
>   > > ----- Original Message -----
>   > > From: Mal Lansell
>   > > To: ukha_xpl@xxxxxxx
>   > > Sent: Tuesday, October 11, 2005 12:36 AM
>   > > Subject: Re: [ukha_xpl] All Stopped
>   > >
>   > >
>   > >  It sounds to me like the internal hub of xPLHal didn't
actually
>   get
>   > > turned off - did you restart the xPLHal service or reboot
after
>   setting
>   > > it to be disabled?
>   > >
>   > > Also, where did you get the hub from?
>   > >
>   > > Mal
>   > >
>   > >
>   > >
>   > > George M wrote:
>   > >
>   > > > Well, I thought it was time to upgrade to all the
latest
stuff
>   going
>   > > > around here. And of course now nothing is working.
Not
sure
>   where to
>   > > > start. Here is what I did.
>   > > >
>   > > > Installed the latest Manager 1.5
>   > > > Uninstalled W800 and reinstalled with the latest
build
>   > > > Installed the XPLHub (not the Java version), and
disabled
the
>   hub in
>   > > > XPLHal
>   > > >
>   > > > At first I had three instances of the W800 in the
manager
>   window to be
>   > > > configured. I could see in the monitor that it was
requesting
>   data,
>   > > > but never got any back. Also no matter how many times
I
put
>   info into
>   > > > the configuration screen, none of it stuck
>   > > >
>   > > > Rebooted
>   > > >
>   > > > Now nothing comes up in the manager, either in the
configured
>   or
>   > > > waiting to be configured window, where before I had
>   > > >
>   > > > XPLHomevision
>   > > > XPL
>   > > > XPLw800
>   > > > XPLCM12
>   > > >
>   > > > I then disabled the XPLHUB and re enabled the
internal hub
of
>   XPLHal
>   > > >
>   > > > Now Homevision, XPL and XPLcm12 are back in the
configured
>   window.
>   > > >
>   > > > XPLW800 stays in the "to be configured"
window, even
though I
>   put all
>   > > > the information into it.
>   > > > I now have two instances in the "to be
configured' window.
The
>   one
>   > > > with the new name and the default one.
>   > > >
>   > > > I am going to try to find a previous version and see
if it
>   will work.
>   > > > Any other ideas?
>   > > >
>   > > > George M
>   > > >
>   > > > [Non-text portions of this message have been removed]
>   > > >
>   > > >
>   > > >
>   > > > xPL Links: http://www.xplproject.org.uk
http://www.xplhal.com
>   > > > http://www.xpl.myby.co.uk
>   > > > To Post a Message: ukha_xpl@xxxxxxx
>   > > > To Subscribe: ukha_xpl-subscribe@xxxxxxx
>   > > > To Unsubscribe: ukha_xpl-unsubscribe@xxxxxxx
>   > > >
>   > > >
>   > > >
>   > > > SPONSORED LINKS
>   > > > Protocol analyzer
>   > > > <
>   > > http://groups.yahoo.com/gads?
>
t=ms&k=Protocol+analyzer&w1=Protocol+analyzer&w2=Protocol+converter&w
>
3=Sip+protocol&w4=Tcp&w5=Protocol+analysis&w6=Protocol&c=6&s=111&.sig
>   =QulmGKu5OpHgigyaWFXqqA>
>   > >
>   > > > Protocol converter
>   > > > <
>   > > http://groups.yahoo.com/gads?
>
t=ms&k=Protocol+converter&w1=Protocol+analyzer&w2=Protocol+converter&
>
w3=Sip+protocol&w4=Tcp&w5=Protocol+analysis&w6=Protocol&c=6&s=111&.si
>   g=_Gav_2JNLbgwjsCn8RqM-w>
>   > >
>   > > > Sip protocol
>   > > > <
>   > > http://groups.yahoo.com/gads?
>
t=ms&k=Sip+protocol&w1=Protocol+analyzer&w2=Protocol+converter&w3=Sip
>
+protocol&w4=Tcp&w5=Protocol+analysis&w6=Protocol&c=6&s=111&.sig=d2G6
>   YVkW-P5WBFmpuWQ3Zw>
>   > >
>   > > >
>   > > > Tcp
>   > > > <
>   > > http://groups.yahoo.com/gads?
>
t=ms&k=Tcp&w1=Protocol+analyzer&w2=Protocol+converter&w3=Sip+protocol
>
&w4=Tcp&w5=Protocol+analysis&w6=Protocol&c=6&s=111&.sig=9xqmZjMntiOfV
>   EPLIpwKUg>
>   > >
>   > > > Protocol analysis
>   > > > <
>   > > http://groups.yahoo.com/gads?
>
t=ms&k=Protocol+analysis&w1=Protocol+analyzer&w2=Protocol+converter&w
>
3=Sip+protocol&w4=Tcp&w5=Protocol+analysis&w6=Protocol&c=6&s=111&.sig
>   =j5RxaJ5TSW2NTgWhIna4qQ>
>   > >
>   > > > Protocol
>   > > > <
>   > > http://groups.yahoo.com/gads?
>
t=ms&k=Protocol&w1=Protocol+analyzer&w2=Protocol+converter&w3=Sip+pro
>
tocol&w4=Tcp&w5=Protocol+analysis&w6=Protocol&c=6&s=111&.sig=OPnkI6Ga
>   dMASTgKewyeqDQ>
>   > >
>   > > >
>   > > >
>   > > >
>   > > >
-----------------------------------------------------------
----
>   ---------
>   > > > YAHOO! GROUPS LINKS
>   > > >
>   > > > * Visit your group "ukha_xpl
>   > > > <http://groups.yahoo.com/group/ukha_xpl>"
on the web.
>   > > >
>   > > > * To unsubscribe from this group, send an email to:
>   > > > ukha_xpl-unsubscribe@xxxxxxx
>   > > > <mailto:ukha_xpl-unsubscribe@xxxxxxx?
>   subject=Unsubscribe>
>   > > >
>   > > > * Your use of Yahoo! Groups is subject to the Yahoo!
Terms
of
>   > > > Service <http://docs.yahoo.com/info/terms/>.
>   > > >
>   > > >
>   > > >
-----------------------------------------------------------
----
>   ---------
>   > > >
>   > >
>   > >
>   > >
>   > > xPL Links: http://www.xplproject.org.uk http://www.xplhal.com
>   > > http://www.xpl.myby.co.uk
>   > > To Post a Message: ukha_xpl@xxxxxxx
>   > > To Subscribe: ukha_xpl-subscribe@xxxxxxx
>   > > To Unsubscribe: ukha_xpl-unsubscribe@xxxxxxx
>   > >
>   > >
>   > >
>   > > SPONSORED LINKS Protocol analyzer Protocol converter Sip
protocol
>   > > Tcp Protocol analysis Protocol
>   > >
>   > >
>   > >
>   > >
-------------------------------------------------------------
----
>   -------------
>   > > YAHOO! GROUPS LINKS
>   > >
>   > > a.. Visit your group "ukha_xpl" on the web.
>   > >
>   > > b.. To unsubscribe from this group, send an email to:
>   > > ukha_xpl-unsubscribe@xxxxxxx
>   > >
>   > > c.. Your use of Yahoo! Groups is subject to the Yahoo!
Terms
of
>   Service.
>   > >
>   > >
>   > >
>   > >
-------------------------------------------------------------
----
>   -------------
>   > >
>   > >
>   > >
>   > > [Non-text portions of this message have been removed]
>   > >
>   > >
>   > >
>   > > xPL Links: http://www.xplproject.org.uk http://www.xplhal.com
>   > > http://www.xpl.myby.co.uk
>   > > To Post a Message: ukha_xpl@xxxxxxx
>   > > To Subscribe: ukha_xpl-subscribe@xxxxxxx
>   > > To Unsubscribe: ukha_xpl-unsubscribe@xxxxxxx
>   > >
>   > >
>   > >
>   > > SPONSORED LINKS
>   > >   Protocol analyzer<http://groups.yahoo.com/gads?
>
t=ms&k=Protocol+analyzer&w1=Protocol+analyzer&w2=Protocol+converter&w
>
3=Sip+protocol&w4=Tcp&w5=Protocol+analysis&w6=Protocol&c=6&s=111&.sig
>   =QulmGKu5OpHgigyaWFXqqA> Protocol
>   > > converter<http://groups.yahoo.com/gads?
>
t=ms&k=Protocol+converter&w1=Protocol+analyzer&w2=Protocol+converter&
>
w3=Sip+protocol&w4=Tcp&w5=Protocol+analysis&w6=Protocol&c=6&s=111&.si
>   g=_Gav_2JNLbgwjsCn8RqM-w> Sip
>   > > protocol<http://groups.yahoo.com/gads?
>
t=ms&k=Sip+protocol&w1=Protocol+analyzer&w2=Protocol+converter&w3=Sip
>
+protocol&w4=Tcp&w5=Protocol+analysis&w6=Protocol&c=6&s=111&.sig=d2G6
>   YVkW-P5WBFmpuWQ3Zw>
>   > > Tcp<http://groups.yahoo.com/gads?
>
t=ms&k=Tcp&w1=Protocol+analyzer&w2=Protocol+converter&w3=Sip+protocol
>
&w4=Tcp&w5=Protocol+analysis&w6=Protocol&c=6&s=111&.sig=9xqmZjMntiOfV
>   EPLIpwKUg> Protocol
>   > > analysis<http://groups.yahoo.com/gads?
>
t=ms&k=Protocol+analysis&w1=Protocol+analyzer&w2=Protocol+converter&w
>
3=Sip+protocol&w4=Tcp&w5=Protocol+analysis&w6=Protocol&c=6&s=111&.sig
>   =j5RxaJ5TSW2NTgWhIna4qQ>
>   > > Protocol<http://groups.yahoo.com/gads?
>
t=ms&k=Protocol&w1=Protocol+analyzer&w2=Protocol+converter&w3=Sip+pro
>
tocol&w4=Tcp&w5=Protocol+analysis&w6=Protocol&c=6&s=111&.sig=OPnkI6Ga
>   dMASTgKewyeqDQ>
>   > >  ------------------------------
>   > > YAHOO! GROUPS LINKS
>   > >
>   > >
>   > >    - Visit your
>   group "ukha_xpl<http://groups.yahoo.com/group/ukha_xpl>"
>   > >    on the web.
>   > >     - To unsubscribe from this group, send an email to:
>   > >    ukha_xpl-unsubscribe@xxxxxxx<ukha_xpl-
>   unsubscribe@xxxxxxx?subject=Unsubscribe>
>   > >     - Your use of Yahoo! Groups is subject to the Yahoo!
Terms of
>   > >    Service <http://docs.yahoo.com/info/terms/>.
>   > >
>   > >
>   > >  ------------------------------
>   > >
>   >
>   >
>   > [Non-text portions of this message have been removed]
>   >
>
>
>
>
>
>
>   xPL Links: http://www.xplproject.org.uk http://www.xplhal.com
http://www.xpl.myby.co.uk
>   To Post a Message: ukha_xpl@xxxxxxx
>   To Subscribe:  ukha_xpl-subscribe@xxxxxxx
>   To Unsubscribe:  ukha_xpl-unsubscribe@xxxxxxx
>
>
>
> -------------------------------------------------------------------
-----------
>   YAHOO! GROUPS LINKS
>
>     a..  Visit your group "ukha_xpl" on the web.
>
>     b..  To unsubscribe from this group, send an email to:
>      ukha_xpl-unsubscribe@xxxxxxx
>
>     c..  Your use of Yahoo! Groups is subject to the Yahoo! Terms
of Service.
>
>
> -------------------------------------------------------------------
-----------
>
>
>
> [Non-text portions of this message have been removed]
>