The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

RE: xPLRioNet beta v3.5d released


  • Subject: RE: xPLRioNet beta v3.5d released
  • From: "Tony Tofts" <tony@xxxxxxxxxx>
  • Date: Sun, 1 Aug 2004 15:13:30 +0100

Hi Andy,

> 1) It refuses point blank to access files on a network share,
> if I copy the same files to a local disk and rescan it sees them fine.

If youre using a drive mapping it won't work as a windows service can't see
a network share, you have to use unc.

> 2) Skip and back didn't work. I added a few albums and
> clicking on back or skip seemed to have no effect, then after
> restarting both client and server it worked

Strange, can't answer that one. But development is on-going and problems
like this _will_ get resolved.

> 3) How can I cue up and play all tracks?

>From the web interface you can't, form the rio's front panel go to
tracks
and 'play all'

> 4) If I cue up a single track and then click 'current' it
> lists the track about 4 times. If I then add another it also
> appears about 4 times, clicking skip locked up the client
> completely (hard reboot required)

Strange, havent see (or had reported by anyone) the current showing
duplicate items.

The change I'm making at the moment should make lock ups of the rio a thing
of the past.

> 1) configure a unit's instance from the xPLRioNetConfig.exe,
> I don't run any other xpl stuff at the moment, and would
> really (really really) like to define each unit without
> having to run the xplHAL or equivalent.

This is going to be added to the web interface.

> 2) if the IR commands were the same as the original -
> especially as I taught homevision the old ones, it would make
> my life so much easier, alternatively if someone has taught
> homevision them already I wouldn't mind a copy of the file.

The ir commands must be the same, there's no way they can changed - it's
hardware based... The xplrionet code just responds to the ir that the unit
detects....

Regards
Tony




xPL Main Index | xPL Thread Index | xPL Home | Archives Home

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.