[Message Prev][Message
Next][Thread Prev][Thread Next][Message
Index][Thread Index]
Re: UPS Schema
- Subject: Re: UPS Schema
- From: super_quirky
- Date: Thu, 24 Jul 2003 16:07:00 +0000
You might want to add the following, also supported by my UPS:
UPS Communications Lost/Restored
UPS Input voltage high/restored
UPS Input voltage low/restored
UPS Output Overload/restored
UPS Output Voltage Low/restored
UPS Output Voltage High/restored
UPS Over-Temperature/restored
Battery Test Initiated
I'm not sure they would all be useful, but some probably will be.
--- In <a
href="/group/ukha_xpl/post?postID=LpRyUBedfwrCIAW4-aM3DLpb3AiCm3BzczzVdG4KRHw3TG2-FnqnSnCjBWHtO2Vaaw4IlrQO4xUzUY3PTvJF">ukha_xpl@xxxxxxx</a>,
"John B" <home-automation@j...>
wrote:
> Hi all,
>
> I'm currently in the process of integrating my UPS into my xPL
network...
>
> I would like to propose the following ups.basic schema -
comments/suggestions welcome.
>
> Regards,
>
> John
>
> --------------------------------------------------------
> Schema Definition
> -----------------
>
> Class = UPS
> Type = BASIC
>
> This schema provides basic information relating to an
Uninterruptable Power Supply (UPS).
>
>
> XPL-TRIG Structure
> ------------------
> UPS.BASIC
> {
> STATUS=MAINS BATTERY
> EVENT=<event name>
> }
>
>
> XPL-CMND Structure
> ------------------
> Not Applicable
>
>
> XPL-STAT Structure
> ------------------
> HBEAT.*
> {
> (hbeat items)
> SCHEMA=UPS.BASIC
> STATUS=MAINS BATTERY
> }
>
>
> Schema Specific Notes
> ---------------------
>
> The EVENT element may contain one of the following values.
> Items marked with a * must be supported by all ups.basic
implementations.
> Other items may or may not be transmitted, depending on the
facilities of the UPS hardware in question.
>
> ONMAINS - The UPS has begun operating on mains power*
> ONBATTERY - The UPS has begun operating on battery power*
> BATTLOW - The UPS battery is low
> BATTFULL - The UPS battery is fully charged
> BTP - Battery Test Passed
> BTF - Battery Test Failed
>
>
>
> Standard Notes
> --------------
> HBEAT.* = hbeat.basic or hbeat.app etc
> (hbeat items) = standard .basic or .app heartbeat items
> [] = optional
> <> = parameter value description
xPL Main Index |
xPL Thread Index |
xPL Home |
Archives Home
|