The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

RE: Re: cbus zone/scene confusion



That's one of the big advantages I've found using HomeVision and one
of Kevin's CB/HV/xAP gateways - it allows some incredibly flexible and
'intelligent' scene handling etc - I haven't needed to use the CB inbuilt
scene functions really. I just create a virtual 'group' on the CB network
and when that's switched, HV recognises this and does it's stuff - e.g.
setting a number of CB lights and closing curtains, switching AV kit etc.
Very powerful :)

Paul.

-----Original Message-----
From: ukha_d@xxxxxxx [mailto:ukha_d@xxxxxxx] On Behalf Of Paul
Gordon
Sent: 07 February 2011 16:58
To: ukha_d@xxxxxxx
Subject: RE: [ukha_d] Re: cbus zone/scene confusion

Ah yes, good point, I'd forgotten that the area was applied at the module
level... - Personally I do use the Area function, but I keep it fairly
simple & only use 2 areas: Upstairs & downstairs, which I use to
switch loads based on whether I'm arming Comfort to Away mode or to Night
mode...

Paul G.


-----Original Message-----
From: ukha_d@xxxxxxx [mailto:ukha_d@xxxxxxx] On Behalf Of Kevin
Hawkins
Sent: 07 February 2011 12:33
To: ukha_d@xxxxxxx
Subject: Re: [ukha_d] Re: cbus zone/scene confusion

Just to mention... you wont be able to place a specific C-Bus 'group' in
an 'area' .    A physical output unit like an 8 channel dimmer or a 12
channel relay can be assigned an area but not each channel independently
.    If all your kitchen lights were on channels off one such unit then
this would be usable for say 'kitchen' .   I think this was an early
feature of C-Bus that has remained but is not longer encouraged.

Scenes are definitely the way to go and work very well ,  They're clever in
that you can divide scenes across several units (which helps if you hit
memory issues) and the indicators on buttons that set scenes light up when
the scene is 'valid' ie all groups are at the correct level.

A scene is 'activated' when a specific C-Bus group is set to a specific
level and this can either be a lighting group or a trigger group.
Trigger groups are just a way of separating the 'trigger'  functionality
onto a different and specific C-Bus application , which improves clarity
and is sometimes necessary when you interact with other C-Bus applications
aside from lighting.

Thinking of 'zones' might add to confusion in how you visualise things on
C-Bus as this doesn't really exist within the lighting application ,
but does exist in the HVAC (heating) application.     I think from how
your using the term zones  that  they are really scenes on C-Bus.

K

On 07/02/2011 11:28, ben_mccormack2000 wrote:
> Starting to get there.
>
> So currently I have 10 zones in the kitchen. All wired into separate
> cbus
channels. So I have the individual control if and when needed.
> I also seem to be able to 'group' those zones into further groups,
> that
can be controlled as one.
>
> Using scenes seems to use lots of memory as well. I am trying to
> ensure I
dont run into issues later down the line.
>
> I will also take a look at areas.
>
> I have found this. Will be reading tonight -
http://www.cbusforums.com/forums/showthread.php?t=439
>
> Ben
>
>
> --- In ukha_d@xxxxxxx, Paul Gordon<paul_gordon@...>  wrote:
>> I'm no expert... I too struggle to understand trigger group
>> functionality
(I
>> *think* I understand the concept at a high-level!)
>>
>> I would summarise groups as the lowest level of "controllable
unit"
>> in
CBUS,
>> - i.e. what you actually switch on&  off to control loads as a
single
>> entity.... so you *could* put all 10 of your kitchen loads into
the
>> same single group if you wanted to, - so long as you understand
that
>> you would then only ever be able to control all 10 loads as a
single
>> switchable entity... - all 10 on, or all 10 off etc... - there
would
>> be no
possibility
>> of individually switching (say) half of those loads separately...
-
>> I'm guessing that probably isn't what you want, if, like in my
case,
>> you have separate sets of lights such as ceiling downlighters,
>> under-cupboard
lights,
>> accent lights, pantry lights, cooker hood lights and so on... I
want
>> to retain the ability to control those sets of loads individually,
>> and so
they
>> are configured as separate CBUS groups.
>>
>> Scenes are (IMHO) the "proper" way to then control all
those separate
groups
>> as a single entity if&  when you need to... think of it like a
macro...
So
>> as you have done, a scene is then an ideal way to implement an all
>> off "macro" - note that there is another level at which
you *could*
>> achieve
the
>> same functionality, - there's also the concept of an
"area" in CBUS,
>> -
which
>> comes above the level of the group... If you put all 10 of your
>> separate channels in a single area (say called
"Kitchen") you could
>> then address
the
>> area as a whole to send commands to all channels that fall within
>> it.. - it's a bit like a "supergroup" if you like - or
if that just
>> makes you
think
>> of ABBA, then perhaps a nested group might be a better analogy...
>>
>> Helpful?
>>
>> Paul G.
>>
>> -----Original Message-----
>> From: ukha_d@xxxxxxx [mailto:ukha_d@xxxxxxx] On
>> Behalf Of Paul Gale
>> Sent: 07 February 2011 09:14
>> To: ukha_d@xxxxxxx
>> Subject: RE: [ukha_d] cbus zone/scene confusion
>>
>> I've never understood trigger groups really! Would be good to know
>> how
they
>> can be used.
>>
>> (56 channels so far)
>>
>> Paul.
>>
>> -----Original Message-----
>> From: ukha_d@xxxxxxx [mailto:ukha_d@xxxxxxx] On
>> Behalf Of Peter Church
>> Sent: 07 February 2011 08:38
>> To: ukha_d@xxxxxxx
>> Subject: RE: [ukha_d] cbus zone/scene confusion
>>
>> Hear, hear!
>>
>>
>>
>> Pete
>>
>> (40 zones and still struggling!)
>>
>>
>>
>>    _____
>>
>> From: ukha_d@xxxxxxx [mailto:ukha_d@xxxxxxx] On
>> Behalf Of Ben McCormack
>> Sent: 06 February 2011 22:27
>> To: UKHA Mailinglist
>> Subject: [ukha_d] cbus zone/scene confusion
>>
>>
>>
>>
>>
>> All
>>
>> I am now upto 30 zones on cbus and all is working quite well.
>>
>> There is still something I cannot get my head around. I have
things
working
>> but sure I have fudged it. I am totally confused about scenes,
>> groups, trigger groups.
>>
>> I have about 10 zones in the kitchen. At the moment I create a
scene
>> with all zones at zero % in order to issue an 'all off' command.
>> Should I put
all
>> kitchen zones into a single group and turn all off that way.
>>
>> Can anyone also simply explain how scenes etc work?
>>
>> Thanks for any pointers
>>
>> Ben
>>
>>
>>
>>
>>
>> [Non-text portions of this message have been removed]
>>
>>
>>
>> ------------------------------------
>>
>>
>> Yahoo! Groups Links
>>
>>
>>
>>
>>
>> ------------------------------------
>>
>>
>> Yahoo! Groups Links
>>
>
>
>
> ------------------------------------
>
>
> Yahoo! Groups Links
>
>
>
>



------------------------------------



UKHA_D Main Index | UKHA_D Thread Index | UKHA_D Home | Archives Home

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.