Fw: Re: RGB lighting

["Lehane Kellett" <lehane@xxxxxxxxxxxxxxxxxxx>]

Hi,
The second photo shows the DMX driver for the lights mounted on the
same plate as the LED's - just needs ~24V and DMX.

I'm using xAP and a DMX software bridge but there are plenty of DMX
controllers around, including wall mounted ones which are about the
same size as a dual faceplate. I'm not sure about CBUS but I don't
think anyone has done a bridge yet.

Lehane


--- In ukha_d@xxxxxxx, Gareth Cook <g@...> wrote:
>
> Interesting. Think these can be mounted in wall uplighters ?=20
>=20
> How do we control these RGB lights , other than powering them ??
Curious=20
> if I can connect these to CBUS...
>=20
> cheers
>=20
>=20
> Hi,
> They don't use 0-10V, that was the control for the old system using
CFL.
>=20
> These use 24V and I use a 10A DIN rail supply (cehck ebay).
>=20
> They do need a heatsink but I was lucky that the mounting bracket and
> housing are metal.
>=20
> Lehane
>=20
>=20
>=20
> --- In ukha_d@xxxxxxx, "Andrew Walker"
<andrew.walker@> wrote:
> >
> > Hi Lehane, could you recommend a suitable 1-10V compatible PSU
for
> these.=20
> >=20
> > Do you think a heat sink will be necessary?
> >=20
> >=20
> >=20
> >=20
> > -----Original Message-----
> > From: ukha_d@xxxxxxx [mailto:ukha_d@xxxxxxx] On
> Behalf Of Lehane Kellett
> > Sent: 14 January 2009 22:40
> > To: ukha_d@xxxxxxx
> > Subject: [ukha_d] RGB lighting
> >=20
> > Since I know many of you enjoy pretty flashing lights and haven't
> got over the demise of the IBM360/370 mainframes.....
> >=20
> > Farnell have some 12 x 1W RGB Led strips reduced to clear at
=A315.
> They can be mounted in a number of existing light fittings - in my
> case they can be seen at:
> >=20
> > http://www.mm-wave.com/honeycottage/RGBDMX.htm
> >=20
> > Part number is 1226723. Oh poo, they've just reduced them to
=A312
> after I've  bought 7 :-(
> >=20
> > Regards,
> > Lehane
> >=20
> >=20
> >=20
> >=20
> > ------------------------------------
> >
>=20
>=20
>=20
> ------------------------------------
>=20
>=20
>=20
>=20
>=20
>=20
>=20
>=20
> Unless stated otherwise above:
> IBM United Kingdom Limited - Registered in England and Wales with
number=20
> 741598.=20
> Registered office: PO Box 41, North Harbour, Portsmouth, Hampshire
PO6 3AU
>=20
>=20
>=20
>=20
>=20
>=20
>=20
> [Non-text portions of this message have been removed]
>



------------------------------------