Fw: Re: RGB lighting

[Gareth Cook <g@xxxxxxxxxx>]

Interesting. Think these can be mounted in wall uplighters ?=20

How do we control these RGB lights , other than powering them ?? Curious=20
if I can connect these to CBUS...

cheers


Hi,
They don't use 0-10V, that was the control for the old system using CFL.

These use 24V and I use a 10A DIN rail supply (cehck ebay).

They do need a heatsink but I was lucky that the mounting bracket and
housing are metal.

Lehane



--- In ukha_d@xxxxxxx, "Andrew Walker" <andrew.walker@...>
wrote:
>
> Hi Lehane, could you recommend a suitable 1-10V compatible PSU for
these.=20
>=20
> Do you think a heat sink will be necessary?
>=20
>=20
>=20
>=20
> -----Original Message-----
> From: ukha_d@xxxxxxx [mailto:ukha_d@xxxxxxx] On
Behalf Of Lehane Kellett
> Sent: 14 January 2009 22:40
> To: ukha_d@xxxxxxx
> Subject: [ukha_d] RGB lighting
>=20
> Since I know many of you enjoy pretty flashing lights and haven't
got over the demise of the IBM360/370 mainframes.....
>=20
> Farnell have some 12 x 1W RGB Led strips reduced to clear at =A315.
They can be mounted in a number of existing light fittings - in my
case they can be seen at:
>=20
> http://www.mm-wave.com/honeycottage/RGBDMX.htm
>=20
> Part number is 1226723. Oh poo, they've just reduced them to =A312
after I've  bought 7 :-(
>=20
> Regards,
> Lehane
>=20
>=20
>=20
>=20
> ------------------------------------
>



------------------------------------








Unless stated otherwise above:
IBM United Kingdom Limited - Registered in England and Wales with number=20
741598.=20
Registered office: PO Box 41, North Harbour, Portsmouth, Hampshire PO6 3AU







[Non-text portions of this message have been removed]


------------------------------------