[Message Prev][Message
Next][Thread Prev][Thread Next][Message
Index][Thread Index]
Re: Suggestion for battery powered RF controlled relay needed..
Kevin,
A few options here, not sure if they meet all your requirements though:
<http://cpc.farnell.com/jsp/search/browse.jsp?N=3D411+1002594+500001>
HTH,
Tim.
On Thu, Dec 3, 2009 at 1:39 PM, Kevin Hawkins
<yahoogroupskh@xxxxxxx> wrote:
> Hi
>
> =A0 I have a need for a small battery powered box to fit on the wall
that
> will provide a relay or dry contact closure output but is controlled
by
> RF - no local power is available for this. =A0. It needs to be
> cosmetically nice as it is to be sited adjacent to a thermostat where
it
> will provide an overide function . =A0The battery lifetime should be
good
> so an open collector or bistable relay is preferred. =A0Perhaps a
Zigbee
> or Z-Wave solution for operation confirmation or alternatively
something
> where RFXCOM could send the RF commands - or failing that anything
that
> could be automated in some way.
>
> =A0 Any suggestions ?
>
> =A0 =A0TIA K
------------------------------------
UKHA_D Main Index |
UKHA_D Thread Index |
UKHA_D Home |
Archives Home
|