[Message Prev][Message
Next][Thread Prev][Thread Next][Message
Index][Thread Index]
Re:Need to switch immersion heater on/off possibly with relay?
- Subject: Re:Need to switch immersion heater on/off possibly
with relay?
- From: "Aaron Coles - 3D Automation Ltd" <aaron@xxxxxxxxxxxxx>
- Date: Sun, 19 Apr 2009 05:42:32 +0100
Ideally I think you should use a contactor - a large power relay.
These are readily available from most electrical wholesalers or the like.
Not too expensive.
Your switching device could be what your familiar with (X10 module etc..),
as its only switching the coil current of the contactor.
Hope this helps
Aaron
[Non-text portions of this message have been removed]
------------------------------------
UKHA_D Main Index |
UKHA_D Thread Index |
UKHA_D Home |
Archives Home
|