[Message Prev][Message
Next][Thread Prev][Thread Next][Message
Index][Thread Index]
RE: Re: IR problems
> That's interesting as we started with a 'CFL friendly' receiver
which was
> even worse! In fact we spoke to Mike @ LetsAutomate and swapped to a
regular
> receiver on his advice.
Well, the CFL Friendly receivers are "Compact Fluorescent"
friendly, they
were developed so that fluorescent lighting didn't screw them up but it
happens that they do have a nice convenient notch in their response which
*CAN* be a cure for the background IR that flat panels spew out. If the
notch happens to coincide with the spurious crap that your panel produces
then they're a bloody godsend though!
> It is better, but the first 60 seconds from turn on
> it's unusable, then the 'error' seems to go away...
It's a common thing with panels - as they warm up from cold then the IR
that
they give off changes.
When I was at Lets it always used to seem that LCDs started off giving off
loads of background IR and then settled down whereas plasmas initially
would
be OK but as they warmed up would get worse.
Phil
------------------------------------
UKHA_D Main Index |
UKHA_D Thread Index |
UKHA_D Home |
Archives Home
|