The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

RE: Re: Bathroom project - Cbus style lighting system....1 room only though!!


  • Subject: RE: Re: Bathroom project - Cbus style lighting system....1 room only though!!
  • From: "Mike Griffiths" <mike@xxxxxxxxxxxx>
  • Date: Tue, 30 Sep 2008 12:28:22 +0100
  • References: <gbsqnq+bnk0@xxxxxxxxxxx>

Hi Noel
You would be stuck fan wise unless you had the relay outputs for cbus (
dim=
mer is no go really)
That would be overkill i think on your budget as they come in lots of 12!!

Everyone should have a PAC ;-)
I jest=20
in your case I don't think you would need one as the Saturn or Reflection
s=
witches come with some logic and scenes=20
For the bathroom I have just set up 5 scenes
These are set to be controlled by the Reflection switch
Each scene then has a trigger group level associated with it and the
Indoor=
PIR with movement, light level and IR just triggers the level for movement=
depending on the light level

Of course if you have Comfort in the house and a PAC you can start turning
=
the shower on when you set the lighting to Shower
And you could turn the TV on and set it to the right channel
And turn it off automatically when you're finished=20

But that's another story :-)
mike


-----Original Message-----
From: ukha_d@xxxxxxx [mailto:ukha_d@xxxxxxx] On Behalf Of n=
oel_pilot
Sent: 30 September 2008 10:16
To: ukha_d@xxxxxxx
Subject: [ukha_d] Re: Bathroom project - Cbus style lighting system....1
ro=
om only though!!

Just the kinda quality expenditure incurring advice I need!! :)

Thanks, you're using comfort for the fan but I assume I can connect
the extractor fan direct to one of the dimmer channels? The
instructions of the dimmers seemed to suggest that although they
warned about the possibility of noise?  This I assume could then use
the logic within the PAC unit to control when the fan comes on.

I am so tempted for the cbus approach, as you said it's a nice first
tester of the tech altho my UKHA mind (and tightness!) is drawn by the
diy approach!!

lots to think about and look at but cheers for the detail

Noel

--- In ukha_d@xxxxxxx, "Mike Griffiths" <mike@...> wrote:
>
> My 2d'worth
> I have a Cbus in the bathroom
> 8x1amp dimmer
http://www.cbus-shop.com/product_info.php?cPath=3D21&products_id=3D28
=A348=
5.08
>=20
> 8 button reflection
http://www.cbus-shop.com/product_info.php?cPath=3D36_32&products_id=3D57
=A3204.63 say
>=20
> Indoor PIR with movement, light level and IR
http://www.cbus-shop.com/index.php?cPath=3D24
=A3174.32=20
> say
>=20
> Interface, DIN Rail Range
http://www.cbus-shop.com/product_info.php?cPath=3D27&products_id=3D45
>  =A3341.06 say (use again when you do the kitchen)
>=20
>=20
> It Rocks
>=20
> If you walk into the bathroom the light is at the right level
> If you are having a bath the lights are focused on the bath
> And if you are having a shower then the shower is bright and
everything else is dim
>=20
> The fan comes on when you enter the bathroom
>=20
> If you walk enter in the middle of the night it is all low level
> If you want to clean the everything is bright
>=20
> HA as it's meant to be
>=20
> OK Comfort turns the fan on (via cbus) but the rest is CBus scenes
intergrated with the Combined sensor (which looks like another GU10)
>=20
> =A31205.09 including VAT from http://www.cbus-shop.com/index.php
>=20
> I think that Bathroom or Kitchen are ideal starters for self
contained projects
> I've seen showers or baths priced at =A34k+
> Again my 2d's worth
> Mike
>=20
>=20
>=20
>=20
>=20
>=20
>=20
>=20
>=20
>=20
>=20
>=20
>=20=09
>=20
> Antena Cyf
> Unit 2
> Cibyn
> Caernarfon
> LL55 2BD
>=20
> Tel:  +44 (0)1286 662200
> Fax: +44 (0)1286 678594
>=20
> Antena Cyf. Rhif Cofrestredig 03626688
> Antena Cyf. Registered No. 03626688
>=20
> Email Disclaimer and Confidentiality Notice
> Ymwadiad Ebost a Rhybudd Cyfrinachedd
> http://www.antena.co.uk/email_disclaimer.htm
>=20
>=20
> Disclaimer added by CodeTwo Exchange Rules
> http://www.codetwo.com
>=20
> ______________________________________________________________________
> This email has been scanned by the MessageLabs Email Security System.
> For more information please visit http://www.messagelabs.com/email=20
> ______________________________________________________________________
>



------------------------------------


UKHA_D Main Index | UKHA_D Thread Index | UKHA_D Home | Archives Home

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.