The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

RE: OT - New BluRay and AV Amp



Does the model specifically list video conversion of analogue sources
to
HDMI? Some of the lower cost AV receivers do not convert at all, some
convert all analogue sources to component (although they may not upscale
th=
e
resolution) but only switch HDMI sources and a limited few convert analogue
to HDMI.

=20

You will also need to check the manual for the AV receiver to see what it
does with audio over HDMI and whether it can be passed on to the TV. My
Onkyo has a setting to either enable/disable this feature, not sure about
the Sony range.

=20

Although it is extra cost Sky are offering an upgrade to SKY HD for =A375
a=
nd
I=92m sure this includes free installation even for existing customers =96
=
offer
runs during October. If you do upgrade then you will also have to pay the
extra =A310/month HD sub. This makes connections dead easy and means you
wi=
ll
get much improved PQ from the HD material they show. If you stick with SD
then you either buy a RGB-component converter and run this to your AV amp,
connect via S-vid (no converter needed), or connect Sky direct to you TV
with a scart lead of the appropriate length and only run audio through the
AV amp.

=20

You might also want to look up the Panasonic BD30 on Amazon, slightly more
than the BD1500 but quite a bargain all the same until the stocks run out.

=20

Neil B.

=20

_____=20=20

From: ukha_d@xxxxxxx [mailto:ukha_d@xxxxxxx] On Behalf Of
frostie2001uk
Sent: 15 October 2008 15:01
To: ukha_d@xxxxxxx
Subject: [ukha_d] OT - New BluRay and AV Amp

=20

I have a Samsung LE40M LCD TV and a Panasonic all in one DVD Amp. It's=20
time to upgrade the DVD to BluRay and then consequently the amp.

At the moment I'm looking at the Samsung BD1500 and the Sony STRDG820=20
(So there's my budget - =A3150 BluRay and =A3250 AV Receiver)

My questions are...

The TV is HDMI, as is the Amp and BluRay but my Sky+ isn't (nor is the=20
Wii) and I'm assuming I plug all the kit into the AV receiver and then=20
run the HDMI to the TV.=20

Do I need to run anything else or will the HDMI carry the analogue=20
signals from the Sky+ via the receiver?

Will the audio be carried to the TV also? or will it only play out of=20
the speakers connected to the amp?

Thanks for your help in advance....

=20



[Non-text portions of this message have been removed]


------------------------------------


UKHA_D Main Index | UKHA_D Thread Index | UKHA_D Home | Archives Home

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.