Re: Re: x10 lights turning themselves on - help please!

["John Risby" <john@xxxxxxxxxxxxx>]

Thanks guys, I'll give it a go tomorrow.

John

2008/6/24 John Risby <john@xxxxxxx>:
> Thanks guys, I'll give it a go tomorrow.
>
> John
>
>
> 2008/6/24 Rob Iles <rob.iles@xxxxxxx>:
>> If you're temporarily taking the CM12 out of service, remember to
remove the
>> batteries from it, so that it completely resets (needs about 24
hours in my
>> experience).
>>
>> Rob
>>
>>
>> 2008/6/24 David Yeend <david.yeend@xxxxxxx>:
>>
>>>   In the past I have had 3 CM12 units. The purchase of a new
unit was
>>> normally
>>> based on trying to resolve the symptoms you have reported.
>>>
>>> When left out of service for a while the offending unit would
seem to
>>> become
>>> stable again once re-connected.
>>>
>>> One experience I had was to have a suspect CM12 and a good one
operating at
>>> the same time. With both connected to a PC with some X10
logging software
>>> looking at the received messages from the known good unit
(can't remember
>>> which) and the offending unit being driven by Homeseer I was
able to see
>>> the
>>> offending unit generating X10 messages that it should not have
been
>>> generating. Strangely it seemed to be receiving its own
messages and
>>> passing
>>> them up to HomeSeer. The volume of message was so great that
it slowed the
>>> HomeSeer machine to a crawl.
>>>
>>> Hope this helps.
>>>
>>> Regards,
>>>
>>> David
>>>
>>>
>>> [Non-text portions of this message have been removed]
>>>
>>>
>>>
>>
>>
>>
>> --
>> --
>> Rob Iles
>>
>>
>> [Non-text portions of this message have been removed]
>>
>>
>> ------------------------------------
>>
>> **** Sponsored By http://www.Berble.com ****
>> ****       Computers You Carry          ****
>>
>>
>>
>>
>>
>>
>

------------------------------------