Re: Samsung 1Tb Drives - Help - Raid settings?!?!

["noel_pilot" <HA@xxxxxxxxxxxxxxxxxx>]

Sorry to reply again, meant to say I don't have PCI express, and I'm
assuming pci express cards won't work in normal pci slots??

--- In ukha_d@xxxxxxx, "noel_pilot" <HA@...> wrote:
>
>=20
> Hmmm this is looking expensive!!! The problem is that my sata
> interface card doesn't support the faster speed, 3gbit/sec.
> Looked into jumper settings...and also a utility you can download from
> samsung that should force the hd to stay at 1.5 but alas no joy.
> Looking on forums there's been a fair few issues with these with lots
> of people on older kit just having no luck!!
>=20
> Now I know as a true ukha'er I should treat this as perfect
> justification to buy more upgrades but it wasn't really in the plan!
>=20
> So does anyone have that they wish to sell...or know of a 'CHEAP' Sata
> 2 PCI interface card?  Everything I'm finding is around the =A340 mark
> at the lowest which wasn't really part of the plan!!
>=20
> I'm on an old ATX motherboard with AMD Socket 462 processor (yes yes
> old i know but does the job) so upgrading means new mobo, processor,
> prob ram the lot!!
>=20
> Cheers
>=20
> Noel
>=20
>=20
> --- In ukha_d@xxxxxxx, "noel_pilot" <HA@> wrote:
> >
> > Thanks for that, poss its because I hadn't bothered to install
the
> > drivers for the SATA card since I last rebuilt. Just odd that it
> > doesn't do it for any of my other drives just the Samsung!!
> >=20
> > Currently fighting with Cyclic redundancy errors on the failing
drive
> > as I just try and transfer the movies off it!! Such a pain having
to
> > do them all individually!
> >=20
> > Thanks
> >=20
> > --- In ukha_d@xxxxxxx, "noughtomate"
<balraj_jassal@> wrote:
> > >
> > > Motherboard settings ? Check your manual.=20
> > >=20
> > > Try using an alternative spare SATA connection on your
motherboard.=20
> > >=20
> > > (Unless you have a raid card installed)
> > >=20
> > > --- In ukha_d@xxxxxxx, "noel_pilot" <HA@>
wrote:
> > > >
> > > > Hi all,=20
> > > > I bought one of these 1Tb samsung drives, plugged in
fine,
working=20
> > > ok
> > > > but everytime i reboot after the bios the pc asks if I
want to
enter
> > > > Raid settings shows the ID of the Samsung drive and
stops there,
> > > > pressing ctrl and S or F4 as it says to enter raid
setup
doesn't do
> > > > anything.
> > > > If I unplug the drive and reset then it boots into
windows
fine and=20
> > > i
> > > > can plug the drive back in!
> > > >=20
> > > > Any thoughts how I sort this?! Sorry for being a bit
dense!
> > > >=20
> > > > thanks
> > > >=20
> > > > Noel
> > > >
> > >
> >
>



------------------------------------